Intercept Extension — Day / Night - Panasonic KX-TD308 Installation Manual

409-410
Intercept Extension — Day / Night
Description
Selection
Default
Programming
Conditions
Feature References
4-102 System Programming
4.6 Outside Line Programming
Intercept Routing provides an automatic re-direction of calls which
cannot or have not been answered (IRNA: Intercept Routing – No
Answer). These programs set the destination in both day and night
modes for each outside line.
• Outside line (CO) number: 1 through 3,
• Extension number: 2 through 4 digits / Disable (no Intercept
All outside lines – Disable — Day / Night
1. Enter a program address (409 for day or 410 for night).
Display example: 409 INTERCEP DAY
2. Press NEXT.
Display: CO Line NO?
3. Enter the outside line number.
To enter outside line number 1, you can also press NEXT.
Display example: CO1:Disable
4. Enter an extension number.
To change the current entry, press CLEAR and enter the new number.
To disable Intercept Routing, press CLEAR.
5. Press STORE.
6. To program another outside line, press NEXT or PREV, or
SELECT and the desired outside line number.
7. Repeat steps 4 through 6.
8. Press END.
• You set the extension numbers in program [003] "Extension Number
Set", voice mail extension numbers in program [118] "Voice Mail
Extension Number Assignment", phantom extensions in program [124]
"Phantom Extension Number Assignment" or floating numbers of
pager(s), DISA (Direct Inward System Access) message(s) and
extension group(s) in program [813] "Floating Number Assignment".
• To assign all outside lines to one selection, press the
In this case, the display shows the contents programmed for outside line
1.
Section 3, Features
Intercept Routing
Routing)
( =all outside lines)
key in step 3.