Fixed Error Messages - Panasonic KX-T336 Installation Instructions Manual

3.00 Fixed Error Messages

DATA ERROR No.
003
004
005
006
007
008
009
012
013
016
0 1 7
018
019
020
021
022
023
024
027
029
Technical Manuals Online! - http://www.tech-man.com
Probable Cause
Unacceptable value is assigned.
Space exists between items.
Some items are left blank.
At least one blank should be left among multiple Leave at least one blank.
items.
Assigned selection value is not for the item,
The number which is set previously in this
screen is assigned again.
The number which is set previously in a different Set the number different from the previous
screen is assigned.
Device is not installed.
Status of the specified device does not accept
this command.
Privilege level is lower than specified level.
Diagnostic error has been detected when INS
command is executed.
Specified service is not executed.
Another maintenance device (remote, PITS,
system) is in use.
Printer is not connected to the system or the
power is off.
Print out is unavailable from Remote.
Entered parameters for Item or Index ia out of
the spepified range.
l
, &I+ " is entered in BT (Batch)
programming.
Calendar IC malfunction.
Backup device is not connec$ed (only when
maintenance device is ATT).
Diierent version at the time of backup.
Assign an allowable value.
Remove the space.
Assign all required items, or leave all items
blank.
Set the assignable value.
Set the number different from the previous
number.
number.
Assign the installed device.
Change the.status of the device to be
acceptable for the command.
Increase the privilege level through the
Change level function.
Verify the related device.
Check specified service.
Wait until another device is finished or let him
finish.
Connect the printer, and make the power on.
Execute print out on-site.
Enter the parameters within the specified
range.
Correct the wrong entry.
Repair calender IC.
Connect the backup device to SIO # 1 Port.
Match the backup version.
10-D-6
(21292)
Countermeasure