Chapter 4 Command Reference
[:SENSe] Subsystem
[:SENSe]:TOTalize Subtree
This subtree controls the Totalize measuring capabilities of the instrument.
[:SENSe]:TOTalize:ARM Subtree
This subtree is used to synchronize the Totalize start and stop arm with events.
The following combination of start/stop arming sources are valid:
STARt:SOURce
IMMediate
IMMediate
EXTernal
EXTernal
[:SENSe]:TOTalize:ARM[:STARt]:SLOPe POSitive | NEGative
Sets or queries the slope of the external start arm signal used in external arming
Totalize measurements.
Query Response
A sequence of ASCII-encoded bytes: POS or NEG
Comments
Related
Gate & ExtArm
Front-Panel
Keys
4-104
STOP:SOURce
IMMediate
TIMer
EXTernal
TIMer
*RST: POSitive
Only applies when [:SENS]:TOT:ARM[:STAR]:SOUR EXT is selected.
Front-Panel Gating Settings
GATE
STOP
AUTO
_______
TIME
_______
EXTERNAL
POS, NEG
EXTERNAL
TIME
Programming Guide