Miele H 250 Operating Instructions Manual page 63

Installation - Ceramic hobs
These hobs are classified in Germany
as "Y" class for heat protection. They
must be positioned so that there is ade-
quate ventilation. There may be a wall
at the rear and wall or tall units at one
side. On the other side, however, no
unit or divider must stand higher than
the hob.
Because of the heat given off, there
must be a minimum distance as fol-
lows:
– 40 mm between the worktop
cut-out and adjacent furniture,
e. g. tall unit.
– 50 mm between the back wall
and the worktop cut-out.
*Space for fixing and cable
Prepare the worktop cut-out as
shown in the illustrations below.
1
3
4
1
3
4
b
Sealing strip
c
Hob
d
Worktop
e
Clamp
f
Screw
2
5
2
5
63