Miele H 250 Operating Instructions Manual page 55

Table of Contents

Advertisement

Correcting minor faults
Installation, maintenance and re-
pairs to the electrical components
of this appliance should only be car-
ried out by a fully competent person
to ensure safety. Repairs and other
work by unqualified persons could
be dangerous. The manufacturer
cannot be held responsible for un-
authorized work.
Some minor problems however can be
dealt with as follows:
Check whether,
the house mains fuse has shorted.
Call an electrician or the Service
dept.
Check whether,
the selector switch is set to the func-
tion required,
control is set at the correct tempera-
ture.
"AUTO" is flashing in the timer dis-
play field.
To switch on the oven independently
of the timer, "@" should show in
the display. Press the "i" button.
the main fuse has blown. Contact a
qualified electrician or the Miele Ser-
vice Department.
the temperature
The bulb needs changing:
Disconnect the appliance from the
electricity supply:
Switch off at the isolator or the mains
fuse box.
Remove the runners.
Lift the lamp cover from its retainers.
Change the bulb:
230-240°V, 25 W, E 14, heat
resistant to 300°C, pear shape.
Press the lamp cover back in its
retainers and put the runners back.
55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

H 250-1

Table of Contents