Firewall Configuration; Configuring The Firewall On Windows - HP UPS User Manual

Firewall configuration

Configuring the firewall on Windows®
NOTE:
disabling ports on the firewall.
Windows® Firewall blocks most communication through unused IP ports. This prevents a server with the
UPS Power Protection Agent installed from using port 3573 to communicate with the HP UPS
Management Module.
To configure the Windows® XP with Service Pack 2 Firewall to make an exception for port 3573:
Click Start, select Control Panel, and then double-click Network Connections. The Network
1.
Connections screen appears.
Right-click the network connection where you are configuring the firewall, and then select Properties.
2.
The Properties screen appears.
For other operating systems, see the operating system documents on enabling or
Firewall configuration 120