Drive Enclosure Handling Instructions - Fujitsu Eternus DX80 S2 User Manual

Disk storage system
Hide thumbs Also See for Eternus DX80 S2:
Table of Contents

Advertisement

Chapter 5 Installing Optional Products
5.2 Installing Drive Enclosures
5.2.3

Drive Enclosure Handling Instructions

About condensation
About static electricity
About shock
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Do
CAUTION
When moving a drive enclosure from a cold place, such as an un-
conditioned store house in winter, to a warmer place such as an air-
conditioned room, the severe temperature change may result in con-
densation forming.
To avoid this, allow the packed drive enclosure sufficient time in the
warmer place (one hour for each 15°C of temperature difference) to
adapt to the new temperature.
Do
CAUTION
When handling drive enclosures, make sure to wear a wrist strap or
touch a metal part to discharge the human body's natural static
electricity. Failure to discharge static electricity may cause device
failure.
Do Not
CAUTION
Do not handle the drive enclosure roughly or subject it to physical
shocks when laying it down.
Do not stack the drive enclosures.
Do not knock or drop the drive enclosure on hard objects.
Copyright 2011 FUJITSU LIMITED
62
P3AM-4842-01ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus dx90 s2

Table of Contents