Ventilation - Pioneer RM-V2550 Manual

(18) Ventilation

To prevent the rise in the internal temperature, the system is equipped with a vent and a vent with a fan on the
top panel and vents on the bottom and rear panels. [Fig. 3-1-8]
Vent with a fan
Be careful not block these vents. Otherwise heat will be stagnated inside the system and may result in a fire
hazard.
When the system is used in a 2-stage configuration or is installed up against the wall, reserve spaces of at least
10 cm (4 inches) to the left and right sides of the system. When it is used in a 3-stage configuration, also make
sure that there is a clearance of at least 5cm (2 inches) between the rear panel and wall and at least 10 cm (4
inches) on the sides. [Fig. 3-1-9]
(With these conditions, it is assumed that there is a space of at least 10cm between the system and the ceiling.)
10 cm
10 cm
Vent
Vent (Bottom)
Set
2-stage configuration
3-stage configuration
INSTALLATION AND ASSEMBLY
Vent
Vent (Bottom)
[Fig. 3-1-8]
Wall
Wall
Set
[Fig. 3-1-9]
10 cm
10 cm
33