Connection With Mvp External Computer - Pioneer RM-V2550 Manual

2. CONNECTION WITH MVP EXTERNAL COMPUTER

• Refer to Chapter 4.(P.117) "External Control by MPJ RS-232C" for how to adjust the MPJ.
¶ Use a RS-232C straight cable.
¶ Refer to the following diagram for connections.
¶ MVP RS-232C Settings
<MVP RS-232C Pin Layout>
1
14
13
25
Connection with External Computer
<External Computer Side>
Straight
FG 1
TxD 2
RxD 3
RTS 4
CTS 5
DSR 6
SG 7
Baud rate : 2400, 4800 , 9600, 19200
Bit number : 7, 8
Parity : NON , ODD, EVEN
Stop bit : 1 , 2
: Setting at shipment
This setting can be changed using the DIP switches on the panel.
Refer to "Chapter 2.(P.17) MVP panel 7 Baud rate switch".
Signal name
<Video Processor Side>
RS-232C IN
1 FG
2 RxD
3 TxD
4 CTSl
5 RTSl
6 DSRl
7 SG
FG Frame Ground
Tx Trandmitted Data
Rx Received Data
RTS Requenst to Send
CTS Clear to Send
DSR Data Set Ready
SG Signal Ground
*
* Pins 4, 5 and 6 are short-circuited inside.
Pins not shown in the diagram are NC.
MVP MANUAL
153