Sony BDV-E980 Manual page 69

Symptom Problems and solutions
A disc does not start playing
• Resmne play has been selected.
Press OPTIONS and select [Play from
from the beginning, beginning], then press @.
Playback does not start from the • The resume point may be cleared from memory depending on the disc when
resume point where you last you open the disc tray.
stopped playing, you disconnect the USB device.
you play other content.
you turn ()IT the unit.
The language for the soundtrack/ • Try using the BD's or DVD's menu.
subtitle or angles cannot be • Multi-lingual tracks/subtitles or multi-angles are not recorded on the BD or
changed. DVD being played.
Bonus contents or other data that • Try the following: @ Remove the disc. @ Turn the system off. @ Remove and
are contained in a BD-ROM reconnect the USB device (page 35). (_) Turn the system on. (_) Inset1 the BD-
cannot be played. ROM with BONUSVIEW/BD-LIVE.
USB device
Symptom
The USB device is not
recognized.
Problems and solutions
• Try the following: (_) Turn the system off. @ Remove and reconnect the USB
device. @ Turn the system on.
• Make sure that the USB device is securely connected to the _ (USB) port.
• Check if the USB device or a cable is damaged.
• Check if the USB device is on.
• If the USB device is connected via a USB hub, disconnect it and connect the
USB device directly to the unit.
BRAVIA Internet Video
Symptom Problems and solutions
The picture/sound is poor/certain • Picture/sound quality may be poor depeudiug on Internet content providers.
programs display with a loss of • Picture/sound quality may be improved by changing the connection speed.
detail, especially during fast- Sony reconunends a connection speed of at least 2.5 Mbps for standard-
motion or dark scenes, definition vide() and 10 Mbps for high-definition video.
• Not all videos contain
sound.
The picture is smalh • Press I" to zoom in.
"BRAVIA" Sync ([Control for HDMI])
Symptom
The [Control for HDMI]
function does not work
("BRAVIA" Sync).
Problems and solutions
• Check that [Control for HDMI] is set to IOn] (page 61 ).
• If you change the HDMI connection, turn the system off and on again.
• If power failure occurs, set [Comrol for HDMI] to [Off I, then set [Control for
HDMI] to [On] (page 61 ).
• Check the following and refer to the operating instructions supplied with the
conlpoueut.
the colmected component is compatible with the [Control lk)r HDMI]
function.
the connected component's setting lk)r the [Control lk)r HDMI] function is
correct.
1>
O
-,I
5"
o
&
o
69us