Rack Dry - Samsung DV448AG Series User Manual

RACK DRY
Installing the drying rack
1. Open the dryer door.
2. Position the drying rack in the tumbler, placing the rear legs in the two recessed areas of the
dryer's back wall.
3. Place the front lip of the drying rack on top of the lint filter.
4. Place the items to be dried on the rack, leaving space between them so air can circulate.
5. Close the dryer door.
6. Use the Time Dry cycle. Select the time according to the moisture and weight of the items.
Start dryer. It may be necessary to reset the timer if a longer drying time is needed.
Washable sweaters
(block to shape and lay flat on rack)
Stuffed toys
(cotton or polyester fiberfilled)
Stuffed toys
(foam or rubber-filled)
Foam rubber pillows
Sneakers
Heat (Extra Low)
Heat (Extra Low)
Air Fluff
Air Fluff
Air Fluff
_ Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the items
....... and lead to a fire hazard.
Operatng hstructions, Tips 25
DV448AEG-02555A EN.mdd 25 2008-03-25 ;_2XL_6:25:58