Connecting The Inlet Hose - Samsung DV448AG Series User Manual

Gas and electric dryer
Hide thumbs Also See for DV448AG Series:
Table of Contents

Advertisement

Available languages

Available languages

CONNECTING
THE iNLET HOSE
Method1
The dryer must be connected to the cold water faucet using the new inlet hoses. Do not use old
hoses.
1. If space permits, attach the brass female end of the "Y"
/
connector to the cold water faucet.
2, Turn the cold water faucet off.
3, Attach the straight end of long hose to "Y' connector.
4, Using pliers, tighten the coupling with an additional two-
thirds turn.
_Do
overtighten, as
may damage
coupling.
not
it
the
5, Attach angled end of long hoses to fill the valve at the
bottom of the dryer's rear frame. Screw on coupling by
hand until it is seated on fill valve connector.
6, Using pliers, tighten the coupling with an additional two-
thirds turn.
Do not overtighten, as it may damage the coupling.
7, Check that the water faucets are on.
8, Check for leaks around "Y" connector, faucets and hoses.
Method2
The dryer must be connected to the cold water faucet using the new inlet hoses. Do not use old
hoses.
1, If "Y" connector cannot be attached directly to the cold
water faucet, the short hose must be used.
2, Turn the cold water faucet off.
3, Attach short inlet hose to cold water faucet.
Screw on coupling by hand until it is seated on the faucet.
4, Using pliers, tighten the coupling with an additional two-
thirds turn.
Do not overtighten, as it may damage the coupling.
5, Attach 'Y" connector to brass male end of small hose.
Screw on coupling by hand until it is seated on connector.
6. Using pliers, tighten the coupling with an additional two-
__/
thirds turn.
_Do
overtighten, as
may damage
coupling.
not
it
the
7, Attach angled end of long hoses to fill valve at bottom
of dryer rear frame. Screw on coupling by hand until it is
seated on fill valve connector.
8, Using pliers, tighten the coupling with an additional two-
thirds turn.
_7}Do
overtighten, as
may damage
coupling.
not
it
the
9, Check that water faucets are on.
10, Check for leaks around "Y" connector, faucet and hoses.
14 hstaling
your dryer
DV448AEG-02555A
EN.indd
14
2008-03-25
;,2_L2_6:25:42

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv448ae seriesDv448agwDv448agpDv448age

Table of Contents