Table of Contents
Advertisement
4.
Press FWD to search forward
or REV to search in
reverse.
5.
Press STOP to stop Go-To searching.
Commercial
Scan (SEARCH
Button)
This is useful for skipping
commercials or short program
segments.
Press SEARCH once during playback to advance the tape
approximately 30 seconds of recorded material.
Each press of the SEARCH button adds an additional 30
seconds up to five minutes.
Tracking
Your VCR has automatic tracking which removes the streaks or
snow from the picture. Automatic tracking is activated when
you insert a tape or turn on the VCR. Occasionally you may
need to manually adjust tracking, especially if the tape was
recorded on a different VCR. Just use the TRACKING (TRACK on
remote) buttons to remove the streaks or snow.
When you manually adjust the picture, automatic tracking is
turned off. To turn automatic
tracking
back on, press both
TRACKING buttons on the front of the VCR at the same time, or
eject the tape and re-insert it. Tracking has no effect during
recording
- only playback.
GO-TO
SEARCH
Current
tape
counter
is
2:17:25
Press
REV
or
FWD
to
go
to
-:--:00
Press
SEARCH
to
exit,
GO-TO
SEARCH
Current
tape
counter
Js
2:17:25
Press
REV
or
FWD
to
go
to
O:O0:O0
Press
SEARCH
to
exit.
Pro-Tect Plus
TM
Locking
Feature
To disable the usage of the VCR, or to protect your timer
recordings, you can lock the VCR so that the buttons on the VCR
or remote won't work.
To Lock: Press and hold the POWER button on the remote
for approximately
six seconds. All of the lighted digits flash
in the VCR's display panel when the VCR is locked.
To Lock While a "rimer Recording
is in Progress:
Press
and hold the POWER button on the remote for
approximately
six seconds.
To Unlock:
Press and hold the POWER button on the
remote for approximately
six seconds.
Locking
Your VCR:
If a timer recording is programmed,
make sure your VCR is turned off.
Locking your VCR prevents the VCR
from being accidentally turned on.
34
Advertisement
Table of Contents
