Table of Contents
Advertisement
Using Two VCRs For Copying and
Editing Tapes
Use one VCR as the playback
VCR and the other as the
recording
VCR.
1.
Connect the VCRs using the diagram
at the right.
2.
Turn on both VCRs and TV.
3.
Tune the TVto the VCR viewing
channel (either 3, 4, or TV's
video input). (See "How to Find Your TV's Video Input
Channel"in
the References section of this manual for more
information.)
4,
5.
If you are using coaxial cables for the connection,
tune the
recording
VCRto channel 3 or 4 (the one selected on the
playback
VCR).
If you are using audio/video
cables, select the line input on
the recording
VCR (L1 for the back jacks or L2 for the front
jacks).
Insert the tape you want to copy into the playback
VCR. Insert
a blank tape with its safety tab in place into the recording
VCR.
6.
Using visual search, locate the segment you want to copy on
the playback
VCR. Pause the tape at this location.
7.
Press RECORD on the recording
VCR, then PAUSE.
8.
Press PAUSE on both VCRs to begin copying.
9.
Press PAUSE on both VCRs to stop copying.
10. Repeat steps 6-9 to copy or edit additional
segments.
Caution:
The unauthorized
recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
Two VCR Connection
CABLE BOX
OR_ANTENNA
PLAYBACK VCR
RECORDING
VCR
TO TV
TO TM
]
29
Advertisement
Table of Contents
