Parameter copy
If another parameter Pattern is created with reference
to the configured parameter Pattern, the parameter
copy function can be used for parameter copy.
Step 1
Display the editing window for the intrusion detection
setting.
Step 2
Click the [Copy Func] button.
→ The copy function dialog will be displayed.
→
STEP3
STEP5
STEP6
<About parameter Pattern (0 - 7)>
This Image Recognition BOX can hold the parameters
of the eight Patterns. The parameter "Pattern 0" is
usually used.
The parameters of "Pattern 1 to 7" are used to switch
parameters by the switching demand from the server.
*
For necessity of parameter switching in accor-
dance with time zones, up to 8 Patterns of param-
eters are available.
Step 3
Select a copy source Pattern.
Pattern 0, Pattern 1, Pattern 2, Pattern 3,
Pattern 4, Pattern 5, Pattern 6, Pattern 7
Default: Pattern 0
Step 4
Select a copy destination Pattern.
When "ALL" is selected, the parameter is copied to
the all Pattern.
ALL, Pattern 1, Pattern 2, Pattern 3, Pattern 4,
Pattern 5, Pattern 6, Pattern 7
Default: All
Step 5
Select a file to be copied.
Parameter, Area Info, Param and Area
Default: Parameter
Step 6
Click the [Copy] button.
→ After completion of copying, the message
→
"Copied." will be displayed.
STEP4
Even if a parameter is registered with the copy desti-
nation Pattern, the Pattern can be overwritten with
new parameter. Be aware that only a part of parame-
ter cannot be copied.
41