Table of Contents
Advertisement
Combinations
--
When installing
cooktpps,
grills and downdraft
vents in the same cutout,
use the following
width dimensions:
Combination
Cutout Width
2 cooktops
23"min.
3 cooktops
35" rain.
Qf°°IQ_OQ\
4 cooktops
47" rain,
1 cooktop and
1 downdraft vent
16o7/8"min.
2coo_opsand
1 downdraff vent
29" rain.
3 cooktopsand
2 downdraft vents
47" min.
Combination
Cutout Width
4 cooktops and
3 downdraft vents
65" rain.
1 cooktop, 1 downdraft
vent and 1 grill
31" min.
2 cooktops,
2 downdraft vents and
1 gdll
49" rain.
1 grill and
1 downdraft vent
18-7/8"
min,
2 grills and
1 downdraft vent
33" rain.
3 grillsand
2 downdraft vents
53 = rain.
All other dimensions
remain the same for all cutouts:
Cutout depth:
20-1/2"
Cutout to front of countertop:
1-1/2"
Cutout to rear wall: 1"
Cutout to combustible
surface:
4" electric
3" gas
Special note for installations
with gas cooktop:
• If a single downdraft vent is to be installed next to a gas cooktop, the
downdraft vent must use the interior
mounted
vent motor only.
• If a gas cooktop is to be located between two downdraft vents, an
exterior vent motor and "T" adapter kit must be used.
• =T" adapter kits (Black 4175456, White 4319251, Almond 4319252) are
available from your KitchenAid dealer.
5
Advertisement
Table of Contents
