Table of Contents
Advertisement
Downdraft Vent (cont.)
IIII
Exterior roof-mounted
system requires Roof
Mount Kit, Part No. 4173296.
I_
Place cardboard or other form of
protection on top of a fiat surface where
you can easily assemble the downdraft vent
system. Remove downdraft blower box and
motor sections from cartons. Remove any
shipping materials, tape and protective film from
downdraft blower box and motor. Remove parts
package from inside blower box opening.
_
emove the four screws (two on each
side) that attach the wiring box to the
blower box. Place screws and wiring box in a
safe place.
be at the front of the cutout.
16
l_ce the adapter plate, which includes a
ack-draft damper, and 9" round take-off
on the blower box, Use all four nuts to attach the
adapter to the blower box.
%
Use a Phillips screwdriver to remove the screws
that attach the legs to the blower box. Place the
slotted area of legs over the area where the
screw openings are located. Replace the screws
but Do Not tighten screws.
Excessive Weight Hazard
Use two or more people to move and install
downdraft vent.
Failure to follow this instruction can result
in back or other injury.
Insert downdraft,
vent into
_j
countertop cutout.
Advertisement
Table of Contents
