Kenmore 272.98201.490 Owner's Manual page 9

Assembling the Drawer
BeginDrawerassemblyby insertingDrawerConnectors into the endsof the (4) DrawerBacks.
(asshown in FIG.A). PushConnectorsall the wayintothe DrawerBackuntil the tabs lock
into place.
Drawer
Side - B
Drawer Back- E
;
III / sD;;:ec _ Drawer Connectors
'/ III/ Orawer Assemb,y
I iv
Ill /
STEP'1. Attach DRAWER Sides B and C to Drawer Front-A.
J I I [ Align Drawer Bottom grooves in Sides with Drawer
II I _ Bottom groove in Drawer Front. Snap Drawer Sides
/ L_t onto clips on Drawer Front (see FIG. B).
n,/ll _J STEP 2. Slide Drawer Bottom-D along grooves on the Sides
JI
I!,! tl/_-_ into the Groove in Drawer Front.
L_//"/ STEP 3. Align groove in Back-E with the Drawer Bottom-D
and snap Back corner clips into Sides-B and C.
STEP4. Attach the Knobs to the Molded Drawer Fronts
using (4) 718" Bolts for Ceramic Knobs or
(4) 4mm x 20mm Bolts for Metal Knobs.
PLEASE NOTE:
BE SURE TO KEEP THE GROOVES IN DRAWER PARTS
'FOR DRAWER BOTTOM) ALIGNED WHEN ASSEMBLING THE DRAWER.
The Drawers may now be installed into your
cabinet as shown, with the Smaller Drawer
at the top and the (3) Larger Drawers on the
bottom Runners (as shown in FIG. C).
FIG. C
Smaller Drawer
3-Larger Drawers
98200-8
Page 8 98201-8