Kenmore 272.98201.490 Owner's Manual page 6

Step 3. Attach Front Brace to Filler Strip on back side of Front using (3) 1-1/2" Screws. Be sure to
position Brace as shown, cut-out down. Attach the Handle with (2) 4.7 mm Bolts for Metal or
(2) #6x1" Panhead Screws for White Plastic Handle to the Front. Attach Rubber Bumpers to the
Front Brace using (2) #6x5/8" Panhead Screws (as shown in FIG. 3). Attach the Front Support to
the back side of the Front using (2) #5xl/2" Flathead Screws (as shown in FIG. 3A). Attach the
Plastic Tray to the inside of Front (as shown in FIG. 3). with (4) #8xl/2" Panhead Screws.
#8xl/2"
Panhead Screws
Plastic Tray
#5xl/2" Screws
Step 4.
Front S_
* Filler Stri
Front Brace
#6x518" Brass
Panhead Screws
Attach the Platform Stopper to the Back using
(2) 5xl/2" Panhead Screws (as shown in FIG. 4).
Rubber rest should be closer to edge.
Rubber Bumpers_
FIG. 3
Handle
201
Back
(Top) _,/,_ FIG. 4
J" Platform Stopper
Back Brace
FIG. 5
Step 5. Begin assembly by guiding the Back, Front
Assembly and Back Brace onto the
connecting bolts and dowels in the
Left Side (as shown at right in FIG. 5);
turn the back upside down and attach it
FIRST to help support Left Side during
assembly. Turn cams to Locked Position.
/_ _ Back @!
(Top) @
* Not previously identified;
part of Front Assembly.
f Fr_bly
98200-5
Page 5
98201-5i