Table of Contents
Advertisement
To record one program while viewing another
You can record one program while viewing another
by setting the VCR for recording, then setting the
VCR/TV select button to "TV",
end selecting the
desired channel on your TV.
To change the channel to be recorded
while
in record mode
During recording, the channel lock function oper-
ates and channel cannot be changed if the CHAN-
NEL select button is pressed.
If you wish to change channel, proceed as follows.
1. Press the PAUSE button.
2. Change channel desired.
3. Pressthe PAUSE button to release record pause
mode.
Recording
broadcast
stereo T'V
The basic procedure for recording broadcast stereo
TV is tbe same as it is for normal off-the-air
recording.
Before you start recording, be sure that "STEREO"
is selected following
"STEREO/MONO
SELEC-
TION" on page 23.
The STEREO indicator will
come on if the station is broadcasting
in stereo.
Press the RECORD button to start recording.
Recording
Second Audio
Program
{SAP)
Some stations transmit the Second Audio Pro-
gram. To record the Second Audio Program, be
sure that
"ON"
is selected following
"SAP
ON/OFF
SELECTION" on page 23. When the
station broadcasts an SAP, the SAP indicator will
turn on.
Press the RECORD button to start
recording.
Your VCR will record the SAP instead of the nor-
mal audio on the linear track. The normal audio
will still be recorded on the Hi-Fi track.
Note: To play back SAP, the "PLAY
SOUND
SELECTION"
on
page 23 must
be set to
"LINEAR".
Counter
memory
function
This is useful if there is a section of tape you want
to view immediately after recording or you want
to return to the same point several times.
.... iT
DISPLAY
button--
CLEAR button
i
REW button --
STOP button I
1. Pressthe DISPLAY button to display the coun-
ter reading in the VCR's display.
2. Begin recording or playing back a tape.
3. At the point you want playback to start, press
CLEAR
button
to
reset the
Counter
to
"O:00:00".
4. Pressthe STOP button when recording or play-
back finishes..
5. Press the DISPLAY button again to display the
counter memory "M"
in the VCR'a display.
6. Press the REW button.
The tape will auto-
matically stop at the pre-sslected "0:00:00M"
position.
NOTE: The tape will also automatically stop at
"0:00:00M"
during fast forwarding.
E25
Advertisement
Table of Contents
