Table of Contents
Advertisement
CASSE'R'E
TAPES
RECORDING TV PROGRAMS
Insertion
and removal
of cassettes
sL o,--on
Insertion
1. Insert the cassette,
Notes:
•
When
the cassette
is loaded,
power
is
turned
on automatically
end TAPE-IN
indi-
cator _
lights.
Removal
1. Press STOP/EJECT
button,
2, Remove the cassette.
Types of video cassette
Use video cassettes with the _
mark in this '
VCR,
The table below shows how to distinguish
difference in recording time of cassettes,
TYPES
T-120
T-160
RECORDING
TIME
SP
EP
120 rain.
360 min.
160 min.
480 rain.
It is recommended that the "SP" speed is selec-
ted to obtain better picture quality when recording,
NOTE:
This VCR cannot record in LP mode.
However, it can play cassettes recorded in LP
mode.
To avoid erasing a recording
Break off the safety tab using a screwdriveror simi-
lar tool.
To re-record on e cassette whlch has its safety
tab removed
Cover the hole with cellophane tape.
Refer to the instructions included with cassettes
for more information.
VCR/I"V
select-
button
REW button --
PAUSE button I
_.
-CHANNEL select
_:_--_:_
___'_
button
,_ _:__:_ ..
*RECORD
buttons
._ -sP EO b u.o.
- STOP button
1. If you wish to view a program being recorded,
turn on "IV and select the channel 3 or 4 for your
video channel.
2. Insert cassette.
VCR power is turned on automatically.
Note: Whenever you change the mode, the
new mode is displayed on the TV screen auto-
matically for about a few seconds.
3. Press SPEED button to select "SP'" or "'EP".
4. Press the VCR/TV
select button to select
"VCR" {VCR indicator lights) if you wish to view
a program being recorded.
"5. Select channel to be recorded.
6. Press RECORD button on the VCR or two
RECORD buttons on the remote control unit.
Recording will start.
Note: If the erase prevention tab of the cassette
has been removed, the cassette is ejected
automatically when you press RECORD button.
7. Press PAUSE
button
to
stop recording
temporarily.
Press again to release.
Note: When the REC'PAUSE mode continues
for more than 5 minutes, the VCR will auto-
matically change to stop mode to protect the
tape.
8. Press STOP button to stop recording.
E24
Advertisement
Table of Contents
