To display the operating environment of the audit log, execute the HDLM
command's view operation with the -sys and -audlog parameters specified.
The following example shows how to execute the command:
>dlnkmgr -l view -sys -audlog
Audit Log
Audit Log Category
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
>
For details on the displayed items and their descriptions, see
Information) on page
Setting Up the Operating Environment
To set up the HDLM operating environment, execute the dlnkmgr command's
set operation. This operation allows you to set up the following functions:
•
Load balancing
•
Intermittent error monitoring
•
Audit log data collection
For details on how to set up each function, see
Environment) on page
For example, to set up the load balancing function, execute the HDLM
command's set operation with the -lb parameter specified. When the
confirmation message is displayed, enter y to execute, or n to cancel the
command.
The following is an example of executing the command:
>dlnkmgr -s host-name -u user-name -p password set -lb on -lbtype
exrr
KAPL01049-I Would you like to execute the operation? Operation name
= set [y/n]: y
KAPL01001-I The HDLM command completed normally. Operation name =
set, completion time = yyyy/mm/dd hh:mm:ss
>
To check whether the settings have been applied, see
Environment on page
Viewing License Information
This section explains how to display license information.
To display license information, execute the dlnkmgr command's view
operation with the -sys and -lic parameters specified.
The following is an example of executing the command:
4-6
6-22.
6-15.
4-5.
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for VMware(R))
: off
: -
set (Sets Up the Operating
Viewing the Operating
view (Displays