Hitachi XP P9500 User Manual page 149

Message ID
KAPL01084-W An attempt to delete the license
key file has failed. File name =
aa...aa
KAPL01088-W The specified parameter values
cannot be specified at the same
time. Operation name = aa...aa,
parameter = bb...bb, parameter
values = cc...cc
KAPL01089-E One of the following was
executed at the same time as an
HDLM command set -lic
operation: another set -lic
operation, or an update of the
license for an update
installation.
Hitachi Dynamic Link Manager User Guide (for VMware(R))
Message Text
Messages
Explanation
aa...aa: Windows-installation-
destination-drive-name
\hdlm_license
Action
When the message that prompts
you to enter the license key is
displayed, enter the license key.
Alternatively, cancel the HDLM
command, store the license key
file directly under the Windows
installation-destination drive, and
then re-execute HDLM command.
Details
aa...aa: Windows-installation-
destination-drive-name
\hdlm_license
Action
If a license key file exists, delete
it.
Details
aa...aa: view
bb...bb: Parameter name
cc...cc: Parameter values that
cannot be specified at the same
time
Action
Execute help operation-name of
the HDLM command (dlnkmgr) to
check which parameter can be
specified, and then retry. For
details on the help operation, see
help (Displays the Operation
Format) on page 6-5.
Action
Check the license by using the
HDLM command's view -sys -lic
operation. If necessary, re-
execute the HDLM command's set
-lic operation. If the same error
message is output again, contact
your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM.
Do not perform the following
operations:
Simultaneously execute the
¢
HDLM command's set -lic
operation with the view -sys
-lic operation.
8-15