Format; Parameters - Hitachi XP P9500 User Manual
Hitachi dynamic link manager software user guide for aix (6.6) (t5208-96012, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (640 pages) ,
- User manual (188 pages)
Table of Contents
Advertisement
collected information is archived in a file and saved to the directory that you
specified. The following files are output:
•
Name-of-the-directory-containing-a-system-crash-dump-file/system-
crash-dump-file
This file contains a symbolic link to the system crash dump file.
•
hbsa.tar.Z
This file contains compressed error information of the Hitachi Command
Suite products other than HDLM.
This file is output only when using the Hitachi Command Suite products
that is the target for collecting error information.
•
getras.tar.Z
This file contains compressed HDLM information and system information.
For details about the information that is stored in the system crash dump file
and getras.tar.Z, see
When you want to collect information other than that in
Information on page
information- collection- definition file. Information defined in information-
collection- definition file is compressed into getras.tar.Z.
When the system is restarted, a part of the information that was collected by
the DLMgetras utility will be cleared. If an error occurs, immediately execute
this utility.
Format
/usr/DynamicLinkManager/bin/DLMgetras {directory-to-which-collected-
information-is-output
[-f file-that-defines-information-to-be-collected] | -h}
You can also use lower-case characters (dlmgetras) as follows:
/usr/DynamicLinkManager/bin/dlmgetras {directory-to-which-collected-
information-is-output
[-f file-that-defines-information-to-be-collected] | -h}
Parameters
directory-to-which-collected-information-is-output
Specify the output directory for the information that is to be collected by
the DLMgetras utility for collecting HDLM error information. The collected
information is compiled into two files shown in Function and output in the
specified directory.
-f file-that-defines-information-to-be-collected
Use this parameter when you want to specify certain directories or files to
be collected. In this parameter, specify the file-that-defines-information-
to-be-collected, which defines the files and directories you want to collect.
Use an absolute path to specify file-that-defines-information-to-be-
collected.
List of Collected Error Information on page
7-7, define the information to collect in the
Utility Reference
Hitachi Dynamic Link Manager User Guide (for AIX(R))
7-7.
List of Collected Error
7-5
Advertisement
Table of Contents
