Format
To Set Up the HDLM Operating Environment
/usr/DynamicLinkManager/bin/dlnkmgr set
{-lb {on [-lbtype {rr|exrr|lio|exlio|lbk|exlbk}]|off}
|-ellv error-log-collection-level
|-elfs error-log-file-size
|-elfn number-of-error-log-files
|-systflv trace-level
|-systfs trace-file-size
|-systfn number-of-trace-files
|-pchk {on [-intvl checking-interval]|off}
|-afb {on [-intvl checking-interval]|off}
|-iem { on [-intvl error-monitoring-interval]
[-iemnum number-of-times-error-is-to-occur] | off }
|-lic
|-audlog {on [-audlv audit-log-data-collection-level] [-category
[[ss] [a] [ca]|all]]|off}
|-audfac facility-value}
[-s]
To Display the Format of the Set Operation
/usr/DynamicLinkManager/bin/dlnkmgr set -help
Parameters
To Set Up the HDLM Operating Environment
Table 6-2 Default and Recommended Values on page 6-17
defaults and recommended values for each setting. If you change the value
of the set operation, the new value takes effect immediately.
Item name
Load balancing
Error log collection
level
Error log file size
Table 6-2 Default and Recommended Values
Default value
on
The Extended Least I/Os
algorithm is used.
3: Collect error information for
the Information level and
higher.
9900 (KB)
Command Reference
Hitachi Dynamic Link Manager User Guide (for AIX(R))
shows the
Recommended value
on
The recommended algorithm
depends on the operating
environment.
3: Collect error information for
the Information level and higher.
9900 (KB)
6-17