Table of Contents
Advertisement
iCON MENUS OPERATION
LOCK (cont.)
Main and Split Blocking
Message
If V-Chip
is enabled
and the program
exceeds
the rating
limit set by you, the blocking
message
will appear
and the
audio will be muted.
Enter your four-digit
secret code if you
wish to continue
viewing the program. After
entering
your
code, all locks and rating blocks
are disabled
until the PTV
is turned off or until all settings
are off.
Note:
If you enter your four-digit secret code to override rating
blocks,
you must
reset
all rating
blocks
by
either
reprogramm#)g
or turning the PTV off
Main Picture
Split Picture
PIP Blocking Message
PIP function is available when V-chip feature is activated. If
the program being viewed in PIP exceeds the set rating
limit, PIP will disappear
and a blocking
message
will
appear on screen.
Note:
If the V-chip feature is activated while PIP is on, PIP will
immediately disappear. Enable PIP functions by setting
V-CHIP ratings to OFF.
SET UP
C3 While the desired sub menu is highlighted, press VOL i _ to
select or activate feature.
g
IDIOMAILANGUE
- Select to change menu language
to
ENGLISH,
ESPAI_OL
(Spanish)
or FRAN(;;AIS
(French).
g
ANTENNA - To select either ANT1 or ANT2.
g
ON
MUTE
- Activates
the onscreen Closed
Caption feature when the MUTE button on the remote
control is pressed. To deactivate press MUTE button
again.
g
I_
MODE
- This television contains
a built-in
decoder
that displays
_
(Closed
Captioned)
text across
the
screen
(white
or colored
letters on black background).
It allows
the viewer
to read the dialogue
of a television
program
or other
information.
The
program
viewed
must include
Closed
Captioning
for the feature
to work.
Activate
the
onscreen
Closed
Caption
feature
by
selecting
one of the following
modes
Note:
Closed Caption#)g does not function when the Picture
Aspect ratio is set to zoom, To properly display Closed
Caption, choose an aspect ratio other than Zoom.
OFF - When Closed Caption is not desired.
C1 - For video related information
to be displayed, up to
4 lines onscreen at a time. (it does not block relevant
parts of the picture). Text may be in any language.
C2 to C4 - For other modes of video related information.
T1 to T4 - For program guide and other information to be
displayed, when available. (Blocks a large portion of the
picture on the television screen).
Note:
C1 mode is recommended
for viewing Closed Caption.
_1 CONVERGE
Note:
Only use the remote control buttons while adjusting
convergence.
The front control panel navigation and
Action buttons have no effecL
Note:
Convergence
seldom
needs
adjusting
except
after
moving the PTV or to make minor adjustments.
Procedure
Press VOL Ib
to enter converge
sub-menu field.
Press CH • or CH Y
to select:
CONVERGENCE
ADJ. - Select to correct minor
convergence problem.
Note:
After
selecting,
press
VOL
I_ to continue
CONVERGENCE
ADJ.
RESET TO DEFAULT - Select to set convergence
to factory default setting.
28 •
Advertisement
Table of Contents
