Storingnumbersforautomaticdialling - Sharp FO-165 Operation Manual

STORINGNUMBERSFORAUTOMATICDIALLING
Automatic dialling is a quick and convenient way of dialling which is performed by
either pressing a Rapid Key (Rapid Key Dialling), or pressing the SPEED DIAL key
and entering a 2-digit number (Speed Dialling). Automatic dialling can be used for
both fax transmissions and voice calls.
To use automatic dialling, you must first store the full number in your fax and assign
a 2-digit Speed Dial number to it. You can also enter a name which appears in the
display when the number ISdialled. Up to 50 numbers can be stored.
+ Speed Dial numbers from "01" to "20" can be used for both Rapid Key Dialling
and Speed Dialling; Speed Dial numbers from "21" to "50" can only be used for
Speed Dialling.
+ To allow easy identification of the Rapid Keys. attach each strip of Rapid Key
labels above the appropriate row of Rapid Keys. The arrangement of the keys is
shown in "Operation Panel" at the beginning of this chapter. Each time you store
a number for Rapid Key Dialling, write the name of the party above the
appropriate key.
Comments:
. You may need to add a pause befween certain digits in the number to allow time
for connection. For example, if you are on a PBX telephone system that requires
an access number to be dialled (such as "9') to access an outside /inc. you wi//
need to enter a pause between the access number and the telephonelfax
number of the otherpa~. Pauses are entered by pressing the REDIAL key (2
seconds per pause). If necessay, several pauses can be entered in a row.
. To enter letters for names or correct a mistake, see "Entering letters for names"
in this chapter.
1
'""~""
m @
Press the keys shown at left. "FAXjTEL
# MODE" will appear in the display.
2
a
Press "1" to select SET
2-1o INITIAL SETTINGS