Loading Fax Paper - Sharp FO-165 Operation Manual

LOADING THE
FAX
PAPER
4
Note: The ~0-365 nas a bui/f-in anti-curi
FO-165: Press the START key. A shon
length of the fax paper will feed out.
Grasp the paper by the edge and pull up-
ward to tear it off.
FO-365: A short length of the fax paper
wil! feed out and be cut off (If this
doesn'i happen, repeat the loading pro-
cedure.)
mecnanlsm that will help to reducepaper
curllng problems. Theanti-curl mechanism ISmore effective a! the beglnn;ng
of the paper roll and less effective toward the end.
TGassure a long life for your fax and obtain the best reproduction quality. we
recommend that >/ouuse the following type of Sha~ fax (thermal) paper which are
available a?your dealer. The use of any other paper may result in poor copy quality
and excessive buiid-up of residue on the print head.
FO-40PR6 THERMAL PAPER (50 m roll)
~"t ~= 1-' - kld~ .
When the paper runs out, OUT OF PAPER will appear in the display. Reception
and copying will no longer be possible. To replace the paper. flrsf take out the old
roll. then load the new roll as descri~ed above.
+ The initial roll of paper is 10 m long.
Handling fax paper
Do not unpack the paper untl! you are read} tc use it, It ma> become d!scoioureoif:
+ II
IS
store~ at hlgn numlait} or high temperature.
+ It ts exposed tc:dlrec! sunllgnt,
+ II comes tn contact with glue, thinner. or a fresnl!, copied blueprint.
+ A rubber erase- or adhesive taDeis used on l;. or it
IS
scratched.
1-6
INSTALLATION