"Extended" Menu
"Extended" Menu
Sub-menu
Display
This lets you make settings related to the projector's display.
Message:
Sets whether on-screen messages are displayed. Messages include the input source, color mode, and "No Signal" message.
Display Background:
Determines the background screen displayed when no image signals are input. Options include "Black", "Blue" or "Logo".
Startup Screen:
Sets whether the startup screen is displayed (the image projected when the projector is started).
A/V Mute:
Determines the background screen displayed when the [A/V Mute] button on the remote control is pressed. Options include "Black", "Blue" or "Logo".
User's Logo
Change the user's logo that is displayed as a background or during A/V Mute. See
Projection
Sets the image orientation, depending on where you place the projector relative to the screen. See
"Front" "Front/Ceiling" "Rear" "Rear/Ceiling"
By holding down the [A/V Mute] button for about 5 seconds, you can change the projection setup in the following ways.
Front
Front Ceiling
Rear
Rear Ceiling
Function
page
28.
page
6.
35