Configuring The Connection - Epson PowerLite 1815p User Manual

note
You can interrupt projection
even when a keyword is
used. Press the ESC button
on the remote control and
select the Close option.
Presenting Through a Wireless Network
58
5. Press the pointer button to select individual letters; then press
to input a character. To add a blank space or to navigate
Enter
backward and forward through the input text, highlight the
arrows and press
Enter
letters, highlight the option and press
highlight and press
Finish
6. If you want to create a password for remote access to the
projector, highlight
enter a password of up to 8 alphanumeric characters. When you're
done, highlight
Finish
7. If you want to set up a security keyword so that only people who
are in the same room as the projector can access it, turn
on. When you connect to the projector, a randomized
keyword
four-digit number or "keyword" is displayed on the screen. When
prompted by NS Connection, enter the keyword on your
computer to connect to the projector (see page 83).
8. When you're done making these settings, select
, and then select
Setup complete
to save the changes. Press

Configuring the Connection

You can use NS Connection to connect to the projector and send
images wirelessly in two modes: Ad Hoc mode or Access Point mode.
Ad Hoc mode (computer-to-computer mode) lets you connect
■
just one computer to the projector at a time; it's easy to set up,
and the only equipment you need is a computer with a wireless
(802.11g, 802.11b, or 802.11a) network card or adapter, or a
Macintosh with an AirPort
. To toggle symbol settings or capital
Enter
.
Enter
Web Control Password
and press .
Enter
to confirm that you want
Yes
to exit the menu system.
Menu
®
or AirPort Extreme card. When you
. When you're done,
, press , and
Enter
Projector
, select
Return