Managing Projectors
150
If you set a Web control password in the projector's Network
■
menu, enter it in the Password box, then click
You see this screen:
Menus
Functions corresponding to remote control buttons
4. Select one of the menu options listed on the left, then change any
of the settings as needed. These settings correspond to those
found in the projector's menu system.
You cannot change the following settings using a web browser:
■
in the Settings menu
Pointer
,
■
User's Logo
Extended menu
and
■
Reset All
Use the controls at the bottom of the screen just as you would the
corresponding remote control buttons. Choose a source, stop the
action, turn off the picture and sound, or turn the projector's power
on or off.
, and
High Altitude Mode
in the Reset menu
Reset Lamp Hours
.
OK
in the
Language