Epson PowerLite 7700p User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. 7700p - PowerLite XGA LCD Projector
  6. User manual
Epson PowerLite 7700p User Manual

Epson PowerLite 7700p User Manual

Epson projector user'sguide 7700p
Hide thumbs Also See for PowerLite 7700p:
Table of Contents

Advertisement

Quick Links

Download this manual
EPSON
®
PowerLite
®
7700p
Multimedia Projector
User' s Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson PowerLite 7700p

Summary of Contents for Epson PowerLite 7700p

  • Page 1 EPSON ® PowerLite ® 7700p Multimedia Projector User’ s Guide...

  • Page 2: Important Safety Information

    SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON product. EPSON is not responsible for any use of this information as applied to other products.

  • Page 3: Table Of Contents

    Registration and Warranty ......5 Unpacking the Projector ......6 Setting Up Positioning the Projector .
  • Page 4 Adjusting the Image ......24 Controlling the Projector ......27 Shutting Down the Projector .
  • Page 5 Where To Get Help ......75 Appendix A: Installing the Projector ......78 Connecting to Additional Connecting to a PC Desktop Computer .
  • Page 6 Connecting to a Second Computer ....87 Connecting to a High-End Workstation ....88 Connecting to a DVI Video Source .
  • Page 7 ® ® he EPSON PowerLite 7700p is a portable projector offering 3000 ANSI lumens of brightness. From boardrooms to auditoriums, your full-color presentations and videos will be bright and visible even in ordinary room lighting. Images are displayed at a resolution of 1024 × 768 pixels. The new 1.3-inch LCD provides a 400:1 contrast ratio for incredibly vivid...

  • Page 8: Welcome

    Getting the Most from Your Projector Your EPSON PowerLite 7700p is a highly versatile presentation tool. note You can connect it to one or two computer sources and up to three You can connect a maximum video sources and easily switch between them. You can also include of four sources at the same sound for up to three of the sources.

  • Page 9: Using Your Documentation

    Notes contain important information about your projector. Reading This Manual Online Your PowerLite 7700p CD-ROM includes an electronic copy of this manual. You may find it convenient to copy it onto your laptop’s hard drive so it’s always with you—for example, when taking your presentation on the road.

  • Page 10: Getting More Information

    PowerBook computer. Owner’s Kit folder Includes your Quick Setup sheet, warranty brochures, CD-ROMs, and EPSON PrivateLine in the folder and keep the folder with your projector at all times. Welcome show navigation first page...

  • Page 11: Registration And Warranty

    EMP Link V program and its User’s Guide. If you still need help after checking this User’s Guide and the sources listed above, you can use the EPSON PrivateLine Support service to get help fast. Call (800) 637-7661 and enter the PIN on the card in your Owner’s Kit.

  • Page 12: Unpacking The Projector

    (or the equivalent) when you need to send the projector to another location. If you are moving the projector by hand, use a carrying case (such as the optional cases available from EPSON). See page 8 for more information about cases. Welcome...

  • Page 13: Additional Components

    Some older PowerBooks and Macintosh desktop models may need the Macintosh adapter set shown on page 83 (available from EPSON; see page 8). Older iMac systems may need a special adapter to provide a VGA output port; see your computer dealer.

  • Page 14: Optional Accessories

    Optional Accessories To enhance your use of the projector, EPSON provides the following optional accessories: Product Replacement lamp and air filter Long throw zoom lens Wide angle lens Customized carrying cases: Ceiling mount Suspension adapter for ceiling mount Kensington security lock...

  • Page 15: Setting Up The Projector

    Setting Up the Projector his chapter tells you how to set up the projector for a laptop computer or video presentation. If you need to set up the projector for a permanent installation or connect it to a desktop or workstation computer, see Appendix A.

  • Page 16: Positioning The Projector

    Positioning the Projector Before connecting the projector, you need to decide where to place it. The location you choose depends on the size of the room and what you are projecting. caution Don’t hold or lift the projector by the lens, or you may damage it.
  • Page 17 If you place the projector below the level of the screen, you’ll have to tilt it up by extending the feet as shown. Tilting the projector upward causes the image to lose its square shape, but you can correct the...

  • Page 18: Connecting To A Laptop Computer

    If you’re using a PowerBook and you can’t connect the cable, you may need to use the Macintosh desktop adapter as shown on page 83 (available from EPSON; see page 8). Computer 1 port Computer 1...

  • Page 19: Connecting The Cable For Remote Mouse Control

    4. Tighten the screws on the connectors. If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 20 for instructions. Connecting the Cable for Remote Mouse Control Using the remote control as a wireless mouse lets you click through slideshow-style presentations, such as PowerPoint, from up to 30 feet away (for details, see page 38).

  • Page 20: Amplifying Computer Audio

    2. Connect the other end of the audio cable to your laptop’s If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 20 for instructions. Setting Up the Projector jack on the projector.

  • Page 21: Connecting To Video Sources

    45.) The projector can receive composite video, S-Video, and component video. You can connect the projector to one or more of these video sources at the same time. If all three are connected, the projector automatically selects S-Video as the video source.

  • Page 22: Connecting Rca Video Cables

    Connecting RCA Video Cables Before starting, make sure the projector and your DVD player or other video source are turned off. 1. Connect the yellow plug on one end of the RCA video cable to 2. Connect the other end of the cable to the video-out jack on your RCA video cable 3.

  • Page 23: Connecting S-Video

    RCA audio cable 3. Connect the RCA audio cable to the left and right audio jacks on the projector. (Match the red and white plugs to the red and white jacks.) 4. Connect the plugs at the other end of the cable to the audio output jacks on your video source.

  • Page 24: Connecting Component Video Cables

    Setting menu (see page 52). RCA audio cable BNC cable audio jacks on the projector. (Match the red and white plugs to the red and white jacks.) output jacks on your video source. ports.) S-Video/BNC...

  • Page 25: Using The Projector

    (as described in Chapter 1), you’re ready to turn on the projector, adjust the image, and give your presentation. Although you can operate the projector without it, the remote control lets you use additional features. See Chapter 3 for instructions on using the remote.

  • Page 26: Turning On Your Equipment

    Turning On the Projector Follow these steps to plug in and turn on the projector: 1. Connect one end of the power cord to the projector’s power inlet. 2. Connect the other end to a grounded electrical outlet. 3. Remove the lens cap.
  • Page 27 Power power button power light The power light flashes green as the projector warms up, and the projection lamp comes on in about 30 seconds. The power light stays green, and you may see a blue screen with the message displayed.

  • Page 28: What To Do If You See A Blank Screen

    If you’re using a PowerBook: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select 2.
  • Page 29 On most systems, the screen and the projector, or display on both at the same time. Allow a few seconds for the projector to sync up after pressing it. Depending on your computer’s video card, you might need to use the Display utility in the Control Panel to make sure that both the LCD screen and external monitor port are enabled.

  • Page 30: Adjusting The Image

    Rotate the zoom ring to reduce or enlarge the image. If the image still isn’t large enough, you may need to move the projector farther away from the screen. You can also use the button on the remote control to zoom in on a portion of the image.

  • Page 31: Resizing The Image

    Resize Adjusting the Height of Your Image If the image is too low, you can raise it by extending the projector’s feet. 1. Stand behind the projector. Pull up the blue foot release levers and lift the front of the projector.

  • Page 32: Adjusting The Image Shape

    Sync Using the Projector If your image looks like projector off to one side of the screen, at an angle. Move it directly in front of the center of the screen, facing the screen squarely. If your image looks like button to correct the shape of the image.

  • Page 33: Controlling The Projector

    Follow the instructions below to access theses features from your projector’s control panel. You can also access these features, as well as many others, by using the remote control as described in Chapter 3.

  • Page 34: Shutting Down The Projector

    When the projector has cooled, the orange light stays on and the exhaust fan shuts off. If you want to turn the projector on again, wait until the orange light stops flashing. Then press the turn off the projector.

  • Page 35: Using The Remote Control

    The remote control lets you access your projector’s features from anywhere in the room—up to 30 feet away. You can use it to turn the projector on and off, control the picture and sound, and highlight your presentation by using it as a digital pointer.

  • Page 36: Turning On And Using The Remote Control

    If fluid gets 2. Remove the cover and insert on your hands, wash them immediately. Remove batteries if you won’t be using the projector 3. Replace the battery for a long period of time. Power Freeze...

  • Page 37: Using The Remote Control

    Using the Remote Control When using the remote control, stand within about 30 feet of the projector. Point the remote control either at the front or back of the projector or at the screen (the projector’s front sensor can detect signals bounced off the screen).

  • Page 38: Controlling The Picture And Sound

    Make sure you have set up your projector and connected your audio or video source as described in Chapter 1 or Appendix A.

  • Page 39: Turning Off The Picture And Sound

    Turning Off the Picture and Sound You can use the button on the remote control to turn off A/V Mute the image and sound and darken your screen. This is useful if you want to temporarily re-direct your audience’s attention without the distraction of a bright screen.

  • Page 40: Displaying Picture-In-Picture Video

    Displaying Picture-in-Picture Video You can open a small video window on your computer image, and view a video at the same time as your computer presentation. First make sure you have connected your VCR or other video source using an RCA or S-Video cable as described in Chapter 1. (You can’t display the picture-in-picture window using component video.) If you’re using S-Video, you need to select it in the as described on page 52.

  • Page 41: Highlighting Your Presentation

    Press again to see the third Power Freeze A/V Mute R/C ON E-Zoom spotlight pointer erase Enter note You can use the projector’s Effect menu to select different pointers. See page 47. Using the Remote Control...

  • Page 42: Using Box Highlights

    You can draw outline boxes on the screen to highlight areas of your presentation or video. 1. To activate the box tool, press button note You can use the projector’s Effect menu to change the color and shape of the box. 2. Use the See page 47.

  • Page 43: Using Horizontal And Vertical Highlights

    Using Horizontal and Vertical Highlights With the bar tool, you can draw bold horizontal or vertical lines on the screen to underline or highlight your presentation points. You can choose from three types of bars. 1. To activate the bar tool, press button horizontal bar appears across the screen.

  • Page 44: Using The Remote Control As A Wireless Mouse

    First make sure you have connected the mouse cable between the projector and your computer as described on page 13 (for laptops) or in Appendix A (for other systems). Note that your computer’s mouse may be disabled when you connect the projector’s mouse cable. If you have a laptop, you won’t be able to use an external mouse;...

  • Page 45: Fine-Tuning The Projector

    Fine-tuning the Projector ou can use the projector’s on-screen menus to adjust the image, sound, and other features. You can also create your own startup screen, customize the highlighting tools, and find out how long your lamp has been in use. This chapter covers the following information:...

  • Page 46: Using The Projector's Menu System

    Using the Projector’s Menu System The eight projector menus let you adjust and customize the projector features from either the remote control or control panel: Fine-tuning the Projector The Video menu controls the look and quality of the projected image. It lets you adjust the image position and fine-tune settings such as Brightness, Sharpness, and Contrast.

  • Page 47: Changing Menu Settings

    Menu Help Comp1 Comp2/YCbCr E@sy-MP Video Auto Resize P in P Preset - Volume + menu options Position Adjustment Tracking 9999 Sync. Brightness Contrast Sharpness Gamma Dynamic Normal Natural Resolution Auto Manual Select Preset Select Reset Execute Fine-tuning the Projector...
  • Page 48 , press Reset Enter select , and then press 6. Press the Enter 7. Press Fine-tuning the Projector on the button (remote control) to scroll through the menu Enter list. Video Menu Sync Tracking Keystone...

  • Page 49: Adjusting The Image

    Adjusting the Image The Video menu lets you make adjustments to the projected image. The options available in the menu depend on which source is connected to the projector: standard computer video, computer digital video, composite or S-Video, or component video. Video...

  • Page 50: Repositioning The Image

    Sync (computer images only) Corrects fuzziness or screen flicker by synchronizing the projector with the tracking signal sent from the computer. Color (composite video or S-Video only) Adjusts the depth or intensity of the image. button...

  • Page 51: Saving And Recalling Computer Settings

    (resolution, tracking, sync signal, and position) for up to five different sessions. This is useful if you use more than one computer with the projector; you can save the settings for each one and recall them when necessary. Follow these steps to save the current session settings: 1.

  • Page 52: Adjusting The Sound

    You see the setting for session number 1 displayed in yellow at the top right of the screen. To select another number, press the setting number you want is displayed. The projector resets according to the selected setting. Adjusting the Sound You can use the Audio menu to adjust the sound volume or treble/bass balance.

  • Page 53: Customizing The Highlighting Tools

    4 Bar Capture Cursor Speed Advanced Reset About Reset All :Select :Enter 3. Press to select the Effect menu. Enter button Enter Menu button Enter . You see the Effect menu: Effect Setting Setting Setting Setting Execute Fine-tuning the Projector...
  • Page 54 4. Use the arrow buttons (control panel) or the 5. Use the arrow buttons (control panel) or the 6. When you’re finished customizing the highlighting tools, press Fine-tuning the Projector customize: Cursor/Stamp Lets you define the shape and size for three different pointers.

  • Page 55: Creating Your Own Startup Screen

    Creating Your Own Startup Screen You can transfer any image on your computer to the projector, and then use it as the screen displayed when the projector is not receiving a signal. You can also set it to be displayed when you press the button, or as a startup screen.

  • Page 56: Setting Up When The Image Displays

    (remote control) to highlight the button to select the Setting menu. Enter button (remote control) to highlight sets your image as the screen displayed when the projector is not receiving a signal. down arrow or button move down to...

  • Page 57: Customizing Projector Features

    To test your setting, press the A/V Mute Press it again to turn off the image. Customizing Projector Features You can use the Setting menu to disable the projector’s sleep mode, adjust the image shape, and customize several other features. 1. Press the button.
  • Page 58 No-Signal Msg Selects the screen color and message to display when the projector is not receiving a signal. The logo setting displays an image that you have transferred to the projector. See page 49 for instructions on transferring an image to use as the no-signal message.

  • Page 59: Setting Advanced Features

    Setting Advanced Features You can use the Advanced menu to configure the projector for rear projection or ceiling mounting, and adjust several other features. 1. Press the button. Menu 2. Use the arrow keys (control panel) or the control) to highlight...

  • Page 60: Viewing Lamp Usage And Other Information

    Used for testing. Leave the setting on for normal operation. Rear Proj. Turn on to project from behind onto a transparent screen. Ceiling Turn on when the projector is mounted upside-down from the ceiling. button. You see the main menu. Menu...

  • Page 61: Restoring The Default Settings

    Restoring the Default Settings The Reset All option lets you return all the projector settings to their default values. Video Audio Effect Setting Capture Advanced About Reset All :Select :Enter Select and press the Reset All Enter remote control to display the confirmation screen. Select all the default settings or to cancel.
  • Page 62 Fine-tuning the Projector...

  • Page 63: Maintaining And Transporting The Projector

    You also need to periodically clean the air filter on the bottom of the warning projector. A clogged air filter can block ventilation needed to cool the Before you clean any part projector and keep it from overheating.

  • Page 64: Cleaning The Lens

    Cleaning the Lens Clean the lens whenever you notice dirt or dust on the surface. Cleaning the Projector Case Before you clean the case, first turn off the projector and unplug the power cord. Maintaining and Transporting the Projector Use a canister of compressed air to remove dust.

  • Page 65: Cleaning And Replacing The Air Filter

    1. Turn off the projector, allow it to cool down, and unplug the power cord. 2. Turn the projector on its side so that the handle is on top and you can access the filter easily. 3. To clean the filter, EPSON recommends using a small vacuum cleaner designed for computers and other office equipment.

  • Page 66: Replacing The Lamp

    You can check to see how many hours the lamp has been used. See page 54. Contact your dealer or call EPSON at (800) 873-7766 in the United States and Canada for a replacement lamp. Request part number ELPLP12 Maintaining and Transporting the Projector Make sure the projector is on its side as shown (not turned upside down) to prevent dust from falling inside.
  • Page 67 Follow these steps to replace the lamp: 1. Turn off the projector and unplug the power cord. 2. Allow the projector to cool down for at least an hour (if it has been on). 3. Use a screwdriver to loosen the retaining screw on the lamp cover.

  • Page 68: Resetting The Lamp Timer

    9. Reset the lamp timer as described in the following section. Resetting the Lamp Timer After you install a new lamp, you need to reset the timer so the projector can keep track of how many hours it has been used. Follow these steps: 1. Press the Maintaining and Transporting the Projector way.)

  • Page 69: Transporting The Projector

    When transporting the projector for business use, first put it in a hard-shell carrying case (such as the optional EPSON case), then pack it in a firm box, using cushioning around the case. When you are hand-carrying the projector, be sure to store it in a carrying case (such as the optional cases offered by EPSON).
  • Page 70 Maintaining and Transporting the Projector...

  • Page 71: Solving Problems

    Solving Problems his chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can’t solve yourself. This chapter explains the following: Using the projector’s on-screen help system What to do when the projector’s status lights flash...

  • Page 72: Using On-Screen Help

    Tells you what to do if you see a Help for the sound Tells you what to do when your audio isn’t working Language selection Lets you display the help information and projector menus in any of nine different languages button. You see the help menu. ? Help...

  • Page 73: What To Do When The Lights Flash

    If the projector is not working correctly, first turn it off and unplug it. Then plug the power cord back in and turn on the projector. If this does not solve the problem, check the status lights on top of the projector and try the solutions recommended below.
  • Page 74 Solving Problems temperature light is flashing orange. The projector is getting too hot. Turn it off and let it cool. Make sure the room temperature does not exceed 104 plenty of space around and under the projector for ventilation.

  • Page 75: Solving Problems With The Image Or Sound

    Try pressing a key on the computer. Description The projector is getting too hot. Turn it off and let it cool. Make sure the temperature surrounding the projector does not exceed 104 and there is plenty of space around and under the projector for ventilation.
  • Page 76 On most systems, the key lets you toggle between the LCD screen and the projector, or to display on both at the same time. Allow a few seconds for the projector to sync up after pressing it. Depending on your computer’s video card, you might need to use the Display utility in the Control Panel to make sure that both the LCD screen and external monitor port are enabled.
  • Page 77 3. Drag one monitor icon on top of the other. This lets you display on the projector screen as well as the LCD screen. 4. If this option isn’t available, click the 5. Select one of the listed seconds for the projector to sync up after making the selection.)
  • Page 78 Windows) when you adjust these settings. Solving Problems Make sure the projector isn’t placed off to one side of the screen, at an angle, or the image won’t be square. Place the projector directly in front of the center of the screen, facing the screen squarely.
  • Page 79 Make sure the audio cable is securely connected to both the projector and your computer’s audio out jack. See page 14 (for laptops) or Appendix A (for other systems).

  • Page 80: Solving Problems With The Remote Control

    For details, see page 13 (for laptops) or Appendix A (for other systems). Solving Problems Make sure the remote control is turned on. Make sure you are within 30 feet of the projector, and within range of the projector’s front or back sensor (approximately 30 left or right and 15 °...

  • Page 81: Where To Get Help

    EPSON Internet FTP If you have Internet FTP capability, use your web browser (or other software for Site FTP downloading) to log onto ftp.epson.com with the user name anonymous and your e-mail address as the password. EPSON E-Mail To receive technical advice through e-mail, go to http://support.epson.com Technical Support and complete the form under the troubleshooting tab, as requested.
  • Page 82 Before you call, please have the following information ready: You can purchase screens, carrying cases, or other accessories from EPSON at (800) 873-7766 or visit the EPSON Store at www.epson.com (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral...
  • Page 83 Appendix A: Connecting to Additional Equipment This appendix explains how to connect the projector to a desktop computer or Macintosh, high-end workstation, more than one computer, or a DVI video source. It also provides guidance on setting up the projector in a permanent installation.

  • Page 84: Appendix A: Connecting To Additional Equipment

    Keystone If you place the projector’s lens so it’s level with the top of the screen, the image will be square and you won’t have to adjust it. If you place the lens lower than the top of the screen, you’ll have to tilt the projector upward if you want to fill the whole screen with the image.

  • Page 85: Connecting To An External Audio System

    The projector’s internal speakers are loud enough for most rooms. However, if your installation requires maximum volume and sound quality, you can connect the projector to external speakers or a public address (PA) system. If you’ve connected multiple audio and video...

  • Page 86: Connecting To A Pc Desktop Computer

    Follow the steps in each section for the cables you need to connect. Before beginning, turn off the projector and computer if they are on. Connecting the Computer and Monitor Cables This illustration shows the connections you’ll be making. For details, follow the steps below.

  • Page 87: Connecting The Mouse Cable

    To use the remote control as a mouse, follow the steps below. You’ll use a different mouse cable, depending on whether your computer has a round PS/2 mouse port or a flat USB port. 1. Connect the round end of the mouse cable to the projector’s port, as shown. Mouse 1...

  • Page 88: Connecting The Audio Cable

    Connecting the Audio Cable If your presentation includes sound and you want to use the projector’s built-in speakers, you’ll need to connect the audio cable. 1. Connect one end of the audio cable to the 2. Connect the other end of the audio cable to the speaker or Appendix A: Connecting to Additional Equipment jack on the projector.

  • Page 89: Connecting To A Desktop Macintosh

    Connecting the audio cable (if you’ll be projecting with audio) Follow the steps in each section for the cables you need to connect. Before beginning, turn off the projector and computer if they are on. Connecting the Computer and Monitor Cables This illustration shows the connections you’ll be making.
  • Page 90 Appendix A: Connecting to Additional Equipment the Macintosh. If it doesn’t fit, you may have to use a Macintosh desktop adapter, which you can buy from EPSON (see page 8). To use the adapter, remove its cover as shown and set its DIP switches according to the resolution you want to use, such as 16-inch mode.

  • Page 91: Connecting The Mouse Cable

    To use the remote control as a mouse follow the steps below. If the Macintosh has a USB port, you can use the USB mouse cable included with the projector. If it has a round mouse port, you’ll need a Macintosh mouse cable; see your projector dealer for help in obtaining the correct cable.

  • Page 92: Connecting The Audio Cable

    Connecting the Audio Cable If your presentation includes sound and you want to use the projector’s built-in speakers, you’ll need to connect the audio cable. 1. Connect one end of the audio cable to the 2. Connect the other end of the audio cable to the speaker or Appendix A: Connecting to Additional Equipment port on the projector.

  • Page 93: Connecting To A Second Computer

    Connecting to a Second Computer If you want to connect a second computer to the projector, you need to use the BNC connectors (labelled ) on the projector. You’ll need a VGA (D-sub 15-pin) to BNC Video cable, which you can purchase from your computer or electronics dealer.

  • Page 94: Connecting To A High-End Workstation

    Connecting to a High-End Workstation Your PowerLite projector is capable of remapping input resolutions up to 1600 resolution for most leading workstations, your projector is ideal for displaying workstation video output. There is no standard for workstation video output. Workstations that follow the SXGA standard and use the HD15 (standard VGA) connector won’t need an adapter cable or any special connection...

  • Page 95: Connecting To A Dvi Video Source

    2. Using the tip of a pen or a small screwdriver, slide the interface switch to the right. (If you need to use the Computer 1 projector’s analog port again, be sure to slide the switch back to the left.) If you want to connect audio for this computer, use the projector’s port;...
  • Page 96 Appendix A: Connecting to Additional Equipment...

  • Page 97: Appendix B: Important Safety Instructions

    Do not use the projector near water or sources of heat. Use attachments only as recommended. Use the type of power source indicated on the projector. If you are not sure of the power available, consult your dealer or power company.
  • Page 98 Appendix B: Notices Do not place the projector where the cord can be walked on. This may result in fraying or damage to the plug. Unplug the projector from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.

  • Page 99: Remote Control Information

    Remote Control Information You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the front and rear of the projector. The projector may not respond to remote control commands under the following conditions: There is an object between the remote control IR emitter and the IR receiver on the projector.

  • Page 100: Declaration Of Conformity

    Trade Name: Type of Product: LCD Projector Model: Appendix B: Notices EPSON AMERICA, INC. 3840 Kilroy Airport Way MS: 6-43 Long Beach, CA 90806-2469 (562) 290-5254 EPSON...

  • Page 101: Fcc Compliance Statement

    FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 102 Appendix B: Notices...

  • Page 103: Appendix C: Technical Specifications

    Appendix C: Technical Specifications General Type of display Size of liquid crystal panels Lens Resolution Color reproduction Brightness Contrast ratio Image size Projection distance Projection methods Internal speaker system Optical aspect ratio Zoom ratio Noise level Keystone correction angle Poly-silicon Thin Film Transistor (TFT) Diagonal: 1.3 inches (33.6 mm) F=1.7–2.3, f=49–63 mm ×...

  • Page 104: Projection Lamp

    Power consumption Lamp life Part number Remote Control Range Batteries Mouse Compatibility Supports PS/2, USB, serial, ADB Remote IR Receiver Supports EPSON Remote IR Receiver, 10-foot cable (typical use for rear screen projection) Dimensions Height Width Depth Weight Electrical Rated frequency...

  • Page 105: Environmental

    To project images output from a computer, the computer’s video card must be set at a refresh rate (vertical frequency) that’s compatible with the projector; see the following table for compatible formats. As noted below, some images are automatically resized to display in one of the projector’s “native”...
  • Page 106 Mode NEC400 SVGA56 SVGA60 SVGA72 SVGA75 SVGA85 XGA43i XGA60 XGA70 XGA75 XGA85 SXGA1—70 SXGA1—75 SXGA1—85 SXGA2—60 SXGA2—75 SXGA2—85 SXGA3—43i SXGA3—60 SXGA3—75 SXGA3—85 UXGA48i UXGA60 UXGA65 UXGA70 UXGA75 UXGA80 UXGA85 Appendix C: Technical Specifications Refresh Rate (Hz) Resolution × 56.65 × 56.25 ×...
  • Page 107 (ANSI/SMPTE) HDTV480I 59.94 (ANSI/SMPTE) NTSC (SVGA) NTSC (XGA) PAL (SVGA) PAL (XGA) SECAM (SVGA) SECAM (XGA) * The image is resized so that it displays using one of the projector’s native formats. Resolution × × × × 1024 × 1024 ×...

  • Page 108: Interface Connectors

    Interface Connectors Monitor Out connector Monitor Out S-Video connector S-Video composite (RCA) video connector Video L-Audio-R audio connectors for composite video optional remote receiver connector Appendix C: Technical Specifications VGA (video in) connector VGA / DVI switch Computer 1 Analog Digital Computer 2 /Component Video R/Cr/Pr B/Cb/Pb H/C Sync V Sync...

  • Page 109: Computer Video Port Pin Assignments

    Computer Video Port Pin Assignments The Computer 1 analog port (VGA) and the Monitor Out port are female video RGB, 15-pin micro-D-style connectors. Here are their pin assignments: Pin no. Computer 1 port Red video Green video Blue video Monitor (ID bit 2) Red video GND Green video GND Blue video GND...

  • Page 110: Image Size And Projection Distance

    Since the size of the image can be changed by rotating the zoom ring, a range of distance is given for each screen size. Note that if you tilt the projector upward by extending the feet or use electronic keystone correction, your image size may vary.
  • Page 111 Wide Angle Lens (ELPAW01) Diagonal screen size Distance 30 inches 2.8 - 3.6 feet (0.85 - 1.09 meters) 60 inches 5.5 - 7.2 feet (1.69 - 2.19 meters) 100 inches 9.3 - 12.0 feet (2.82 - 3.66 meters) 200 inches 18.6 - 24.0 feet (5.67 - 7.33 meters) 300 inches 28.1 - 36.1 feet (8.57 - 11.00 meters)
  • Page 112 Appendix C: Technical Specifications...

  • Page 113: Index

    Desktop adapter, Macintosh, 83 to 84 Desktop computer, connecting projector to, 80 to 82, 83 to 86 Digital visual interface See DVI Distance from projector to screen, 10, 104 to 105 Drawing on the screen, 35 to 37 DVI (Digital Visual Interface) cable, 7, 8...
  • Page 114 FCC compliance statement, 95 Filter See Air filter Focusing, 24 Foot release levers, 25 Freeze button, 33 FTP site, EPSON, 75 Gamma setting, 44 Height of image, adjusting, 25 Help, 4 to 5, 75 to 76 Help button, 66 Help system, using, 66...
  • Page 115 Picture See Image Picture-in-picture video source, selecting, 52 Pin assignments, connector, 103 Pointer tool, 35 Positioning image, 25 Positioning the projector, 10 to 11, 104 to 105 Power button, 21 consumption, 98 status light, 67 supply, 98 Presenters Online, 4, 75...
  • Page 116 Safety instructions, 91 to 92 Screen image See Image Screen, distance from projector, 10, 104 to 105 Setting menu, 40, 51 to 52 Sharpness setting, 44 Sleep mode, 28 Software, 5 Sound adjusting tone, 46 to 47 adjusting volume, 32, 46 to 47...

This manual is also suitable for:

Emp-7700Elp-7700

Table of Contents