Unpacking And Checking Contents; Tools Needed; Table Of Loose Parts - Craftsman 113.206933 Owner's Manual

-//
d checking contents
TABLE OF LOOSE PARTS
Item
No. Description Qty.
A Jointer-Planer .............................. 1
7/:16" Wrench __
3/4°'_Wrench
3/8" Wrench Medium Screwdriver
M0def:113.206933 Jointer-Planer is shipped complete in
onecarton and INCLUDES Steel Legs, and Motor.
Separate all parts from packing materials and check each
onewith the illustration and the list of Loose Parts to make
certain all items are accounted for, before discarding any
packing material.
If any: parts are missing, do not attempt to assemble the
jointer/planer_ plug in the power cord or turn the switch on
until the missing parts are obtained and are installed
correctly.
Remove the protective oil that is applied to al{ unpainted
metal surfaces. Use any ordinary household type grease
and spot remover.
WARNING: Never use gasoline, naptha or similar highly
volatile solvents.
Apply a coat of paste wax to the table.
Wipe all parts thoroughly with a clean, dry cloth.
WARNING: FOR YOUR OWN SAFETY, NEVER CONNECT
PLUG TO POWER SOURCE OUTLET UNTIL ALL
ASSEMBLY STEPS ARE: COMPLETE, AND YOU HAVE
- READAND UNDERSTAND THESAFETY AND OPERA-
T| ONAL INSTRUCTION S.
B V-Bett_ 1,/2 x 52 " ............................ 1
*C 5/32 Setscrew Wrench ....................... 1
*D 1/8 Setscrew Wrench ........................ 1
*E Motor Pulley, 2-1/2" Dia ...................... 1
*F Sliding Guard Knob ......................... 1
*G Concave Plastic Washer ..................... 2
H Sliding Guard .............................. 1
*J Sliding Guard Rod .......................... 1
*K Nut, 1/2-13 ................................. 1
*L Lockwasher, 1/2 ............................ 1
*M Lockwasher. No. 10 ......................... 2
*N Screw, Pan Hd., 10-32 x 1/4 ................... 2
O Owners Mariu!! .............................. 1
*P Depth of Cut Handwheet ..................... 1
*Q Screw, Sems, 1/4-20 x 1-1/4 .................. 1
R On/Off Power Outlet ........................ 1
*S Washer, 17/64 x 1/2 x 1/32 .................... 2
"T Lockwasher. External 1/4 .................... 2
*U Screw, Pan Hd. 1/4-20 x 1/2 .................. 2
V Jointer-Planer Belt Guard .................... 1
*W Attaching Hardware (2 Nuts, 2 Bolts)
X Belt Guard Clips ............................ 3
Y Bracket. Mounting ......................... 1
Z Beft Guard Support Bracket .................. 1
AA Bett Guard Support ......................... 1
AB Screw Pan Hd. 10-32 x 1/2 .................... 2
AC Motor Pulley Belt Guard ..................... 1
AD Switch Key ................................ 1
AE Hold Down/Push Block ...................... 2
AF Fence ..................................... I
........ Fence ............................... I
*Supplied in Loose Parts Bag #507437
AF
AG
A
\ \
0
AD AE
6