Troubleshooting
The "SP 700 cannot be used" message appears (Macintosh
Possible cause
The printer software has
been corrupted.
Your printer icon doesn't appear in the Chooser (Macintosh)
Possible cause
Your system has extension
conflicts.
You sent several print jobs, but none are printing (Macintosh)
Possible cause
The print queue is on hold.
You get a type 39 error on the Macintosh
Possible cause
The printer driver is
corrupted.
You cannot print on a Windows NT 4.0 network
Possible cause
Your printer is not set up
correctly as a remote
printer.
Solutions
Remove and reinstall the printer software as described on
page 6-5. Then, in the Extensions Manager, disable Quick Draw
GX. Select SP 700 in the Chooser, enable Monitor3, and restart
your Macintosh.
Solution
In the Extensions Manager, disable Quick Draw GX. Choose
SP 700 in the Chooser, make sure
then restart your Macintosh.
Solution
In the EPSON Monitor3 dialog box, select Start print queue from
the Printer menu to release the queue and resume printing.
Solution
Delete and reinstall the printer driver as described on page 6-6.
Solution
You may need to use a different network path and printer port.
Select a different port in the printer's Properties windows and
enter the new network path to your printer at the DOS prompt.
Then restart your computer. See your Windows NT
documentation for instructions on changing the printer port and
network path.
6-14
)
Monitor3 is enabled,
EPSON