Introduction; Windows System Requirements; Macintosh System Requirements - Epson Photo 700 User Manual

Introduction

Note:
If you don't have a
CD-ROM drive, you can
get the printer driver
software on diskettes
or download it through
your modem. See your
Getting Started guide
for details.

Windows System Requirements

To use your printer and its software with a PC, your system
should have:
®
An IBM compatible PC with at least a 486 DX2/66 MHz
or faster processor (Pentium
recommended)
Windows 3.1x, Windows 95 or later, or Windows NT 4.0
At least 16MB of RAM (20MB recommended)
At least 50MB of free hard disk space for storing images
(100MB recommended)
VGA, Super VGA, or better display adapter and monitor
Double-speed CD-ROM drive (quad-speed or faster
recommended)
A shielded, twisted-pair parallel printer cable (6 to 10 feet
long) to connect your computer to the printer; the cable
must have a D-SUB, 25-pin, male connector for your
computer and a 36-pin, Centronics
for the printer.

Macintosh System Requirements

To use your printer and its software with a Macintosh, your
system should have:
Any Macintosh or Power Macintosh model except early
models such as the Macintosh Classic, Macintosh +,
Macintosh 512, or PowerBook
System 7.1 or later (7.5 or later recommended)
At least 16MB of built-in RAM (20MB is recommended)
At least 50MB of free hard disk space for storing images
(100MB recommended)
13-inch RGB or better display
2
®
100 or equivalent
®
compatible connector
™
100