Audio Options Settings; C_Channel Settings - Sony BRAVIA KDL-52XBR5 Operating Instructions Manual

MTS Stereo For stereo reception when viewing a TV program broadcast in stereo.
Eqj_(v stereo, bilingual
Auto SAP
Automatically s'a, itches the TV to second audio programs when a SAP
and mono prognzm.s signal is received. If no SAP signal is present, the TV remains in
Stereo
mode.
Mono For mono reception. Use to reduce noise during weak stereo
broadcasts.
• MTS is available only for analog programs.
Speakers TV Speakers Select to nse the TV speakers for audio.
Audio System Select this option if yon wish to use an external audio system for the
TV sound. By selecting this option yon are disabling the TV speakers.
Audio Out Fixed
Select to fix the audio outpnt and allow you to adjust the volume "a, i th
Eas 3 control qfl,olume your audio system's remote control. (The TV's remote control's VOL
ad/us'tmeut
and MUTING
buttons
have no effect on Audio Out.)
Variable Select to control the Audio Out's
vohnne and hinting with your TV's
remote controh
• Alternate Audio is available only for digital programs. If the program you are watching is also available in other
languages from the audio tracks, and if that language is what you have selected in the Language setting, your TV
will automatically switch to the matching language with the Alternate Audio feature. The Alternate Audio
option may be accessed by pressing OPTIONS on the remote control when alternate audio stream is available from
the broadcaster.
Cable
Auto Program
Add Digital Channels
On For receiving cable channels via cable TV provider.
Off For using an antenna.
• You should run Auto
Program
alter changing the Cable setting.
Automatically sets up the channel list on the TV l\_r all receivable channels. Channel
scanning will be based on On/Off of Cable.
1
Select Auto Program.
2
Select OK to start Auto Program. When Auto Program is completed, the screen
will display the number of channels found.
3
Press RETURN to exit Auto Program.
• Running Auto Program ,_,ill clear Favorites list.
• If you run Auto Program
again, previously scanned chmmels will be overwritten "a, i th
the newly scanned channels.
Select to add digital channels. Be sure to have the Cable option selected appropriately for
the signal source. (Usefld for antenna installation)
4O