Vcr And Cable Box - Sony WEGA KDE-37XS955 Operating Instructions Manual

VCR and Cable Box
";_" Before connecting a
cable box, See "Using
CableCARD TM'' o n
page 51.
..................... iiii ii ii
Your cable company scralnbles some channels, such as premium
channels (,a_ich requires you to use a cable box), but does not scramble
all channels.
i i H ¸ _ 7 .i i _ > % _
With this connection, you can use all the dual picture features.
il
Use the remote control to change channels coming through the cable
box. You must first program the remote control for your specific cable
box; see "Pro mamlning the Remote Control" on page 58.
Use the remote control to change channels coming directly into the TV's
CABLE input jack. (The TV's tuner provides a better signal than the
cable box.)
Record channels coming through the cable box and channels coming
directly into the TV
A splitter, which is a small, inexpensive device that you can purchase at
your local electronics store.
Four coaxial cables.
Two A/V cable or two S VIDEO cable with audio cables.
i ii !
Connect the CATV cable to the single (input)jack of the splitter.
Use a coaxial cable to connect one of the sptitter's two output jacks to
the TV's CABLE input jack.
Use a coaxial cable to connect the splitter's other output jack to the
cable box's input jack.
Use a coaxial cable to connect the cable box's output jack to the VCR's
RF input jack.
Use an A/V cable to connect the cable box's A/V output jacks to the
TV's A/V input jacks.
Use the 75-ohm coaxial cable (not supplied) to connect the VCR's RF
output jack to the TV's VHF/UHF input jack.
Use an A/V cable to connect the VCR's A/V output jacks to the TV's
A/V input jacks (VIDEO 1 or 3).
Run the Auto Setup prograln, as described in "Setting Up the Channel
List" on page 53.
Using S VIDEO jacks? See page 29.