Toshiba TOSLINE-S20 Instruction Manual page 30

TOSLINE-S20 Active Star Coupler (ASC25) Instruction Manual
(2) Optical fiber cord
Any type of optical fiber cords may be applicable if only they have the transmission
characteristics of optical fiber cable, given above, and they are connectable with F07 Type
connector, further they have the following-listed mechanical strength characteristics.
Outer diameter (mm)
Weight (kg/km)
Allowable tension (kg)
Allowable bending radius (mm)
That type of cord is used for connecting transmission modules inside of panel and for
connecting an optical fiber cable with a transmission module. We recommend the use of a H-PCF
cord that is described below.
Manufacturer: Sumitomo Electric Industries, Ltd.
Agency: Takachiho Electric Co., Ltd.
Model:
(A) Optical fiber cord with connector on one end. (¨¨ denotes cord length.)
2001H-M-¨¨¨¨ DCV-HC-20/07
(B) Optical fiber cord with connector on both ends. (¨¨ denotes cord length.)
2001H-MM-¨¨¨¨ DCV-HC-20/07
TOSLINE S20
Table 9.2
Optical connector CF-2001H
Cord length
Figure 9.6
Cord length
Figure 9.7
2.2 0.2 4.4
8
max. 25
min. 50
DCV-HC-20/07
29
6F3B0360
0.4mm