Installation And Wiring; Method For Mounting The Main Unit - Toshiba TOSLINE-S20 Instruction Manual

TOSLINE-S20 Active Star Coupler (ASC25) Instruction Manual
9.

Installation and Wiring

9.1

Method for mounting the main unit

The Active Star Coupler may be installed within a cubicle, on a table, or onto a panel.
(1) Installation in a cubicle
Figure 9.1 Installation of Active Star Coupler in a cubicle
Using L-shape brackets and M5 screws (12 to 20 mm in length), mount the Active Star
Coupler main unit to the base for the unit.
In that case, remove the rubber feet at the bottom of the Active Star Coupler. The L-
shape brackets have already been attached to the main unit of Active Star Coupler.
(2) Installation on a table
For the case of installation of Active Star Coupler on a table, place the Active Star Coupler
on the table. The Active Star Coupler is equipped with rubber feet at the bottom. If the attached
L-shape bracket is unwanted, remove them by detaching the screws at the sides of the main unit.
After removing the L-shape brackets, retighten the once detached screws.
(Note) Do not stack the Active Star Couplers because the Coupler is not designed to have
strength bearing that weight.
TOSLINE S20
Active Star Coupler
Base for the unit
Support for the unit
Cubicle
25
6F3B0360
L-shape
bracket
Unit: mm