Printing On Posterboard - Epson 10600 Printer Manual

2-20 | Using Paper and Other Media
Note
If PRESS PAUSE
BUTTON doesn't appear,
you may have the wrong
paper source selected
(see step 2).
Caution
Make sure the board is
not bowed and its
surface is not wrinkled, or
it could damage the print
head.
4. Feed the sheet into the paper slot until it meets resistance. Make sure the
right edge of the paper is straight and aligned with the scale on the roll
paper cover. You see
display.
5. Press the button. The print head moves and the sheet feeds into
Pause
printing position automatically.
display.
6. Print your page. After it is finished, the sheet stays in the printer.
7. To remove your print, hold it while pressing the

Printing on Posterboard

You can print on heavy stock up to 44 × 62.2 inches, such as EPSON
Posterboard Semigloss (available in sizes up to 28 × 40 inches). Follow these
instructions when you print on posterboard or other media more than
19 mil (0.5 mm) thick.
1. Set the paper basket to catch your printouts in front of the printer. See
page 2-23 for instructions.
2. Make sure no other paper is loaded for printing. You can leave roll paper
in the printer, but wind it up fully and secure it with the roll paper belt
(see page 2-18).
3. Press the
Paper Source
2-20
PRESS PAUSE BUTTON
appears on the control panel
READY
button until the
Sheet
on the control panel
button.
Paper Feed (–)
light comes on.