Power Button - Epson 10600 Printer Manual

1-30 | Setting Up the Printer
Note
If you're connecting
through the parallel or
Ethernet port, do not turn
on your printer when you
see a window telling you
to do so. Instead, wait
until the Stop Searching
button appears. Then
click the button and go to
step 9.
7. If you're connecting through the parallel port or Ethernet port, see the
note at left. Otherwise, follow the instructions below for your system.
Windows 95 or NT: Turn on your printer by pressing the P
button, then go to step 9.
Windows 98, Me, or 2000: When you see a window asking you to turn
on your printer, press the P
Windows XP:
When you see a window asking you to turn on your printer, press
•
the P
Power
Wait until you see the Found New Hardware Wizard for the Stylus
•
Pro 10600.
Once the Found New Hardware Wizard appears, select
•
software automatically
Make sure the file shown below is selected. Then click
•
1-30
button. Then go to step 9.
Power
button.
, then click
Select this file
Power
Install the
.
Next
Next
.