Epson PhotoPC L-500V User Manual page 12

❏ Do not insert objects into any openings as they may touch dangerous voltage points or short
out parts.
❏ Never disassemble or modify this product.
❏ Use only indoors, in a dry location.
❏ Do not expose to water or excess humidity.
❏ Use the type of power source indicated on the label, and always supply power directly from
a standard domestic electrical outlet.
❏ Do not place multiple loads on the electrical outlet.
❏ Be sure your AC power cord meets the relevant local safety standards.
❏ Never insert or disconnect the power plug with wet hands.
❏ Power-supply cords should be protected from abrasion, cuts, crimping and kinking. Be sure
to place your cords to avoid any damage. Do not place objects on top of the power cord or
allow the power cord to be stepped on or run over. You should take special care to try to keep
the power cord straight at the ends and the points where it enters and leaves the transformer.
❏ Do not allow the AC power cord to become damaged or frayed.
❏ Unplug your equipment from the electrical outlet and refer servicing to qualified personnel
under the following conditions:
If the power cord or plug is damaged; if liquid has entered your equipment; if your equipment
has been exposed to rain or water; if your equipment has been dropped or damaged; if your
equipment is operating abnormally or exhibits a distinct change in performance. Adjust only
those controls described in your product documentation.
❏ Never attempt to repair this product yourself. Improper repair work can be dangerous.
❏ Unplug this product from the wall outlet before cleaning.
12
Introduction