Table of Contents
Advertisement
Installation and Software Setup for PCs Running Windows
List of Procedures
The actions you need to take are described in the procedures listed in Table 2-1.
Procedure
number
Connecting the Modem
The software set must be started with the Modem disconnected from the computer. The procedure
(Procedure 2-2, Procedure 2-3, Procedure 2-4 or Procedure 2-5 depending on Windows version)
tells you when to connect the modem. Fujitsu recommends that you use these procedures because
they are shorter and easier to perform.
The setup can still be performed if the modem has already connected but you must follow a
different set of procedures (Procedure 2-6, Procedure 2-7, Procedure 2-8 or Procedure 2-9
depending on Windows version) followed by (Procedure 2-2, Procedure 2-3, Procedure 2-4 or
Procedure 2-5). This method is longer and harder to perform and is not recommended by Fujitsu.
Page 2 - 2
Issue 02 March 02
2-1
2-2
2-3
2-4
2-5
2-6
Software Setup for Windows 98 - Modem Plugged In
2-7
Software Setup for Windows 2000 - Modem Plugged In
2-8
Software Setup for Windows ME - Modem Plugged In
2-9
Software Setup for Windows XP - Modem Plugged In
Table 2-1:
Title
Modem Hardware Installation
Software Setup for Windows 98
Software Setup for Windows 2000
Software Setup for Windows ME
Software Setup for Windows XP
In Commercial Confidence
ADSL USB Modem - User Manual
Page
2-5
2-7
2-10
2-14
2-17
2-26
2-29
2-32
2-35
FTEL
Advertisement
Table of Contents
