Accessories And Attachments; Carton Contents; Unpacking And Checking Contents - Craftsman 152.21152 Owner's Manual

AVAILABLE ACCESSORIES
Visit your Sears Hardware Department or see the Sears
Power and Hand Tool Catalog for the following
accessories.
ITEM
Replacement grinding wheels
Wire and Buffing wheels
Spacers
Wheel dressers
Universal stand
STOCK NUMBER
See catalog or store
See catalog or store
See catalog or store
See catalog or store
9-22250
Sears may recommend other accessories not listed in
this manual.
See your nearest Sears Hardware Department or Sears
Power and Hand Tool Catalog for other accessories.
Do not use any accessory unless you have completely
read the Owner's Manual for that accessory.
Use only accessories recommended for this Bench
Grinder. Using other accessodes may be cause serious
injury and cause damage to the Bench Grinder.
UNPACKING AND CHECKING
CONTENTS (Fig. C)
This Bench Grinder will require a minimal amount of
assembly. A 12mm x 10mm open end wrench is pro-
vided for mounting the Tool Rest Assemblies and the
Spark Arrestor Assemblies. A philips screwdriver is not
provided to mount the Wheel Dresser Support
Remove all of the parts from the shipping box and lay
them on a clean work surface. Compare the items to
(Fig. C), verify that all items are accounted for before
discarding the shipping box.
Fig. C
If any parts are missing, do not attempt to plug in the
power cord and turn "ON" the Bench Grinder. The
Bench Grinder can only be turned "ON" after all the
parts have been obtained and installed correctly.
The following items are to be provided in the shipping box:
A. Grinder
B. Quench tray
C. Wheel dresser
D. Hex Wrench 12mm x 10mm open end
E. Left Eyeshield assembly (not shown)
F. Right Eyeshield assembly
G. Left tool rest assembly (not shown)
H. Right tool rest assembly
I. Drill Bit Sharpening Plate
D
H
A
F
6