Work Light; Permanent Mounting - Craftsman 152.21152 Owner's Manual

WORK LIGHT (Fig. J)
The Bench Grinder is provided with a FlexibleWork
Light to assist in visibilityof the workpiece.
The Bench Grinder is NOT provided with a light bulb for
the Flexible Work Light.
PERMANENT MOUNTING (Fig. K)
Use the mounting pads on the base of the gdnder to
firmly attach grinder to a solid work surface (hardware
not included). See Figure K.
Fig. K
To reduce the risk of fire, use a 120V, 40 watt or less
Track Light Bulb, Type R20, medium base or equivalent
(not included). DO NOT use a light bulb that extends
past the end of the light housing.
1. The Flexible Work Light (A) may be turned "ON" or
"OFF" by using the rotary switch (B) on the top
surface of the housing. The switch can be rotated in
the clockwise direction only. See Figure J.
NOTE: The Flexible Work Light can be turned "ON" or
"OFF" even if the Bench Grinder is turned "OFF".
CAUTION: The Flexible Work Lighthousing will remain
hot for a few minutes after turning it "OFF". Avoid contact
with housing until it is cool.
Fig. J
A
B
To avoid serious injury, secure the Bench Grinder to a
solid work surface. If the Bench Gdnder is not securely
mounted, it will have the ability to move or tip over during
grinding operations and possibly cause the operators
fingers to contact the grinding wheels.
10