Table of Contents
Advertisement
Available languages
Available languages
f
Drive Control
GasCa
Headlk
Lever
Two-Way
Chute ControP
Control
I Steering
ol
• ChuteDirectional
Control
Drift
Cutters
/
OilFill
Chute
Assembl
/
Augers
Tool
Skid Shoe
Figure11
Now that youhavesetupyoursnow thrower,it's importantto become
NOTE:Do not turnthe ignitionkey in an attemptto startthe engine.
acquainted with its controlsand features.Referto Figure11.
Doingso maycauseit to break.
SHIFT LEVER
Theshift leveris locatedon the rightsideof the handle panel.
Placetheshift leverinto anyof eightpositionsto controlthe
directionof traveland groundspeed.
Forward
Ii
CHOKE CONTROL
Yoursnowthrowerhassix forward(F) speeds.Positionone (1) is t 2
The chokecontrolis foundon the rearof theengine and is activated
FI
R1
R2
the slowestand positionsix (6) is the fastest.
Reverse
Yoursnowthrowerhastwo reverse(R)speeds.One (1)is the
slowerand two (2) is the faster.
I11
byrotatingthe knobclockwise.Activatingthechoke controlclosesthe
choke plateon the carburetorand aids in startingthe engine.
PRIMER
Depressing the primerforcesfueldirectlyinto theengine'scarburetor
to aid in cold-weatherstarting.
IGNITION KEY
Theignition key isa safetydevice.It mustbe fully inserted in orderfor
theenginetostart, Removethe ignition key whenthesnow thrower i s
not in use.
OIL FILL
Engineoil levelcan be checkedand oil addedthrough theoil fill.
Meets ANSI Safety Standards
CraftsmanSnowThrowersconformto thesafety standardof the AmericanNationalStandardsInstitute(ANSI).
12
Advertisement
Table of Contents
