Canon EOS REBEL XS Instruction Manual page 4

Preparing for Live View Shooting*
During Live View shooting, do not point the camera toward the sun. The
sun's heat can damage the camera s internal components.
Live View shooting will disable a few Custom Function settings. (p.153)
Under low light or brignt light conditions, the Live View image might not
reflect the brightness of the captured ssage
If the light source within the image changes, the screen rnight flicker. If
this happens, stop the Live View shooting, then resume Live Viev
shooting under the actual light source to be used
During Live View image display, if you point the camera in a different
dlrecuon, it might throw off the correc-c orightness momentaniy and the
image might not look right. Wait until the image udghtness stabilizes
before shooting.
If there is a very ungtst light source in the picture, such as the sun. the
bright area might be blackenea on the LCD monitor. However the actual
captured image wilI correctly show the bright area
If you set the [r_t: LOD brightness] to bright settings in low light,
chrom_nance noise may appear }n the Live View image. However, the
chrominance noise will not be recorded to the captured image.
When you magnify the image, the image sharpness may look more
pronounced than it really _s.
_ Under the [[f1_ Custom Functions (C.Fn)] men&, setting [Auto Lighting
Optimizer] (p.156) to [0: Enable] may display a darkly-exposed (set with
exposure compensation_ image bngh[er.
if the camera ts not operated for a prolonged period, the power will turn
off automatically as set with I l_° Auto power off]. %109) If [_ft ° Auto
power off] is set to [Off], the Live View shooting will stop automatically
after 30 rain. (camera power remains on)
The image's fie dot view is about 100%.
With the wdeo cable (provided) connecting the camera to a TV set, you
can wew images on the TV. (p.128)
97