Mitsubishi Electric MN converter Operating Manual page 42

(d) Conducting the "Other setting"
With "Other setting," the optional function to facilitate graph
observation can be set.
Click [Option] on the menu bar. Click "Other setting."
Other Setting Screen will be displayed.
1) Moving [Scroll bar] by dragging or clicking
the value of the horizontal grid line from 0 to 4. The horizontal grid line will be displayed on the
graph in a number of the value above.
*The sampling time can not be set by on-line.
2) Clicking
displaying the horizontal grid line in the number being
set to the graph.
(e) Starting the graph
Clicking initiates monitoring to graph the data for
each one minute. The sampling time to allow graphing by
online system is limited to 500 minutes maximum. If 500
minutes are exceeded, the data of old time is eliminated by
the excess time.
(2) Screen function and operation
- The current monitor data is displayed on [Lower column].
- Clicking [Graph number] makes the graph line bold.
- [Current time] is displayed.
- Clicking suspends the monitoring.
At suspension, [Scaler] will be displayed on the graph.
Dragging the scaler displays the data on the scaler at the
current value column and [Time] at the under part of the graph
number.
- Moving [Scroll bar] by dragging or clicking
display range of the graph.
can be operated as same as the local remote
controller.
[Refer to 3.10 Operation control.]
* Here, BC operation cannot be carried out.
- Clicking clears the graph being displayed. The set values of the graph setting items and other
setting items will remain unchanged.
(3) Ending the graph
To finish Trend Graph Screen and return to Operation Status Monitor Screen, click [Return] on the
menu bar or click
displayed. For returning, click
Operation Status Monitor Screen.
returns to Trend Graph Screen
. A message of [Finish the trend graph and return to the monitor?] will be
, while not returning, click
changes
moves the
41
[Graph number]
. Clicking
(3)
returns to