Connection
Caution: Please turn off the power before connecting.
Connect to the TV
Terminal board for the DVD player
Connections to TV
Safety precautions
1. This DVD player has video output mode, you can choose it to connect with the TV terminal.
2. If your TV has component input terminal, then you can use the signal connecting cable to connect
with the DVD player's component output terminal. By doing so, the picture will be more clear.
3. To avoid affecting the picture output, don't connect video, SCART, component at the same time.
4. DVD Player setting
*
According to the colour system setting of theTV, select the colour system in the "TV MODE" function
setting.
*
If the DVD player is connected to wide screen TV, then set "TV TYPE" to "16:9" in the system setup
item.
*
If the DVD player is connected to normal TV, then set "TV TYPE" to "4:3PS" or "4:3LB" in the system
setup item.
Terminal board for Video -Box
- 8 -
TV