Hitachi AX-M138 Instruction Manual page 19

4. Press SELECT on remote control to confirm
5. Press SEL - /SEL + to select the component
Presets Station (1-20)
1. In the current station receiving status, press the numeric number 1-10 on remote control for preset
station 1-10. For stations 10-20, press 10+ with the numeric number.
2. If the display shows
It means this preset station is empty.
3. If the preset station is not empty, and shows another station
The unit will select and play this station instead of current station
Information Display (DAB)
A) General Information
You can browse and set below DAB related information, by pressing the INFO button on remote control
a. Signal Strength
b. Time
c. Transfer Rate
d. Program Type
e. Dynamic Text Display(DLS)
In any current station,
1. Press the INFO button on remote control, the display shows the signal strength as below:
2. Press INFO button again, the display shows the Time as below:
3. Press INFO button again, the display shows the Transfer Rate as below:
EMPTY
P 1
BBC N
BBC D
BBC N
BBC D
BBC
- - - -
BBC
1350
BBC
192K
- 18 -